Storage
Store between -40 and 40 °C [40 and 104 °F] in dry area.
Health, Safety, and Environmental Awareness
Please see the 8481 Safety Data Sheet (SDS) for greater details on transportation, storage, handling
and other security guidelines.
Environmental Impact: The volatile organic content is 4% by WHMIS and European standards. Not
regulated as a dangerous good for transport.
Health and Safety: Wear safety glasses and disposable gloves to avoid exposures.
Approximate HMIS and NFPA Risk Ratings Legend:
0 (Low or none); 1 (Slight); 2 (Moderate); 3 (Serious); 4 (Severe)
Application Instructions
The conductive grease performance depends on mainly on surface preparation. Improperly prepared
contact surfaces can degrade the paste’s stability, conductivity, and lubrication characteristics. While the
thickness and coverage are also important, the application method itself can easily be adjusted according
to performance and application needs.
Prerequisites
Wear gloves and protective clothing (see 8481 SDS). This product is messy.
Clean and dry the surface of the substrate to remove other oils and greases, as well as dust, water,
solvents, or any other contaminants.
Recommendation: Use MG 824 Isopropyl Alcohol
Equipment
Lint free cloth (for cleaning contact and for wiping excess residue)
Spatula or stick application tools (sized appropriately for your application)
Isopropyl alcohol or other residue-free organic solvents
NOTE: Avoid oil-based cleaners (like WD-40) that are designed to leave a film on the metal surface.
Contaminant oil or grease films may act like barriers reducing the electrical contact between the
conductive paste and the metallic substrate.
