FMRTFQ1-315

DS069-8 May 04 ©2004 Reg. No. 227 4001, England Page 1
FM TRANSMITTER & RECEIVER FM-RTFQ SERIES
H
YBRID MODULES. FM-RRFQ SERIES
RTFQ1
RRFQ1
RTFQ2
RRFQ2
FM Radio Transmitter & Receivers
Available As 315 or 433 or 868MHz
Transmit Range Up To 250m
Miniature Packages
Data Rate upto 9.6Kbps
No Adjustable Components
Very Stable Operating Frequency
Operates from –20 to +85
0
C
Transmitter
3-12 Supply Voltage
SIL or DIL Package
Receiver
PLL XTAL Design
CMOS/TTL Output
RSSI Output
Standby Mode (max 100nA)
5V Supply Voltage
Applications
Wireless Security Systems
Car Alarms
Remote Gate Controls
Remote Sensing
Data Capture
Sensor Reporting
Description
These miniature RF modules provide a cost effective high performance FM Radio data link, at either 315,
433.92 or 868MHz. Manufactured using laser trimmed Thick Film ceramic Hybrid the modules exhibits
extremely stable electronic characteristics over an Industrial Temperature range. The hybrid technology uses
no adjustable components and ensures very reliable operation.
This transmitter and receiver pair enables the simple implementation of a data link at distances upto 75 metres
in-building and 250 metres open ground.
These modules will suit one-to-one and multi-node wireless links in applications including car and building
security, EPOS and inventory tracking, remote industrial process monitoring and computer networking.
Because of their small size and low power requirements, both modules are ideal for use in portable, battery-
powered applications such as hand-held terminals.
DS069-8 May 04 ©2004 Reg. No. 227 4001, England Page 2
FM TRANSMITTER & RECEIVER FM-RTFQ SERIES
H
YBRID MODULES. FM-RRFQ SERIES
Transmitters
There are two versions of transmitter:
RTFQ1; A Dual in Line Package operating at 3.3V. This provides the most rugged mechanical fixing to
the host PCB. Power Down mode is also available.
RTFQ2; A Single in Line Package incorporating a voltage regulator for 3-12V operation. (Compatible
with many other RF transmitter modules available)
Transmitter Block Diagram
Part Numbering
Part Number Description
FM-RTFQ1-315 DIL FM Transmitter Module 315 MHz
FM-RTFQ1-433 DIL FM Transmitter Module 433.92 MHz
FM-RTFQ1-868 DIL FM Transmitter Module 868.35 MHz
FM-RTFQ2-433R SIL FM Transmitter Module 433.92 MHz 3-12V I/P
FM-RTFQ2-868R SIL FM Transmitter Module 868.35 MHz 3-12V I/P
Receivers
There are two versions of receiver:
RRFQ1: A Single in Line Package with sleep / Power down mode.
RRFQ2: A Single in Line Package, pin compatible with many other receivers
Receiver Block Diagram
Part Numbering
Part Number Description
FM-RRFQ1-315 SIL FM Receiver Module 315 MHz
FM-RRFQ1-433 SIL FM Receiver Module 433.92 MHz
FM-RRFQ1-868 SIL FM Receiver Module 868.35 MHz
FM-RRFQ2-433 SIL FM Receiver Module 433.92 MHz
FM-RRFQ2-868 SIL FM Receiver Module 868.35 MHz
XT AL
XT AL
Oscillator
PLL
Synthesizer
Power Amp
In
En
Out
GND GND
Vcc
GND
Pre Amp
Filter
Out
Mixer
10.7MHz
IF Filter
FM
Demodulator
Comparator
PLL
Synthesizer
Vcc
In
DS069-8 May 04 ©2004 Reg. No. 227 4001, England Page 3
FM TRANSMITTER & RECEIVER FM-RTFQ SERIES
H
YBRID MODULES. FM-RRFQ SERIES
RTFQ1 Mechanical Dimensions
RTFQ2 Mechanical Dimensions
Pin Description
RTFQ1 RTFQ2 Name Description
1 N/A En Enable (active high)
2 5 IN Data input
3 1 GND Ground, Connect to RF earth return path
4 3 Vcc Supply Voltage
5 4 GND Ground, Connect to RF earth return path
6 2 EA External Antenna
Technical Specifications
Electrical Characteristics MIN TYPICAL MAX DIMENSION
Supply Voltage RTFQ1 2.1 3.3 4.00 V
Supply Voltage RTFQ2 2.5 12.00 V
Supply Current 7 8 mA
Standby Current (IN = EN = Low) 100 nA
Frequency
315.0
433.92
868.35
MHz
RF Output into 50
(Vcc=3.3V)
+5 / +5 / +1 dBm
Initial Frequency Accuracy -35 0 +35 KHz
FM Deviation 25 30 35 KHz
Harmonic Spurious Emissions -50 dBc
Input High Voltage RTFQ1 1.5 Vcc V
Input High Voltage RTFQ2 1.5 5.5 V
Power up Time (En to full RF) 1 mS
Power up Time (Power on to full RF) 5 mS
Max Data Rate 9.6 KHz
Operating Temperature -25 +80
°C
1
2
3
Top View
(Components
Underneath)
20.32mm
11.43mm
PCB Layout Requirements
6
5
4
5.08mm
2.54mm
20mm
Module Thickness 2mm
Pins on "0.1 pitch
Pin Dimensions :
0.25mm x 0.50mm
30.48mm
10.67mm
PCB Layout Requirements
Module Thickness 2mm
Pins on "0.1 pitch
Pin Dimensions :
0.25mm x 0.50mm
RTFQ2
12 345
1mm
20.32mm
2.54
2.54 spacing

FMRTFQ1-315

Mfr. #:
Manufacturer:
Description:
RF TRANSMITTER FM 315MHZ MODULE
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet