MAX4947/MAX4948
Hex SPDT Data Switch
2 _______________________________________________________________________________________
ABSOLUTE MAXIMUM RATINGS
ELECTRICAL CHARACTERISTICS
(V
CC
= +2.7V to +5.5V, T
A
= -40°C to +85°C, unless otherwise noted. Typical values are at V
CC
= +3V, T
A
= +25°C.) (Notes 2, 3)
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
V
CC
to GND ...........................................................-0.3V to +6.0V
All other pins to GND (Note 1)......................-0.3V to V
CC
+ 0.3V
Continuous Current
NO_, NC_, COM_ .......................................................±100mA
Peak Current NO_, NC_, COM_
(pulsed at 1ms, 50% Duty Cycle)................................±200mA
(pulsed at 1ms, 10% Duty Cycle)................................±300mA
Continuous Power Dissipation (T
A
= +70°C)
25-Bump UCSP (derate 12.2mW/°C above +70°C) ....976mW
24-Pin TQFN (derate 20.8mW/°C above +70°C) .......1667mW
Operating Temperature Range ...........................-40°C to +85°C
Junction Temperature ........................................................150°C
Storage Temperature Range .............................-65°C to +150°C
Bump Temperature (soldering)
Infrared (15s) ...............................................................+220°C
Vapor Phase (60s) ...........................................................+215°C
Lead Temperature (soldering) .........................................+300°C
Note 1: Signals on CB_, NO_, NC_, COM_, EN exceeding V
CC
or GND are clamped by internal diodes. Limit forward-diode current
to maximum current rating.