3M™ Scotch-Weld
™
Instant Adhesives
Description (continued) 3M™ Scotch-Weld™ Instant Adhesive CA9 is a high-strength cyanoacrylate
adhesive that cures slower than many cyanoacrylates at room temperature. The
longer set rate allows more time for proper alignment of parts before bonding takes
place. It has excellent adhesion to many metals, plastics and rubbers, and produces
bonds with more shock and impact resistance than many typical cyanoacrylate
adhesives. Meets CID A-A-3097, Type II, Class 3.
3M™ Scotch-Weld™ Instant Adhesive CA40 is a high-strength, very fast-setting
cyanoacrylate adhesive that cures at room temperature with very low bonding
pressures. It has particularly good adhesion to many difficult to bond substrates
such as EPDM rubber, aluminum and flexible vinyl.
3M™ Scotch-Weld™ Instant Adhesive CA40H is a high-strength cyanoacrylate
adhesive. It is a higher viscosity, slightly slower setting version of Scotch-Weld
CA40. It has particularly good adhesion to many difficult to bond substrates, such
as aluminum, EPDM rubber, and flexible vinyl. Scotch-Weld CA40H exhibits good
resistance to soap solutions and isopropyl alcohol. Its high viscosity helps prevent
run off during application, and its slower set time allows additional time for proper
alignment of parts.
3M™ Scotch-Weld™ Instant Adhesive Gel CA50 is a high-strength, surface
insensitive, gel cyanoacrylate adhesive. Its gel consistency allows it to be used in
many non-sag vertical applications, and to fill gaps up to .020 inches. The very
slow cure rate allows plenty of time to reposition parts. Meets CID A-A-3097,
Type II, Class 5.
3M™ Scotch-Weld™ Instant Adhesive CA100 is a high-strength cyanoacrylate
adhesive. Its relatively high viscosity (approximately 3000 cps) allows gap-filling
capability up to .020 inches. It has high T-Peel strength, thermal shock resistance,
impact resistance, and excellent metal bonding capabilities. Meets CID A-A-3097,
Type II, Class 3.
