THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
PROPRIETARY NOTE
*
*
DO NOT
SCALE FROM
THIS PRINT
MMS-1XX-02-XXX-XX-XX-XXX
No OF POSITIONS
-02 THRU -40
(PER ROW)
ENTRY/ROW SPECIFICATION
-SH: SINGLE ROW, HORIZONTAL ENTRY
-DH: DOUBLE ROW, HORIZONTAL ENTRY
-SV: SINGLE ROW, VERTICAL (TOP) ENTRY
-DV: DOUBLE ROW, VERTICAL (TOP) ENTRY
LEAD STYLE
-02: SURFACE MOUNT
PLATING SPECIFICATION
-S: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN TAIL
-L: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN TAIL
-F: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN TAIL
-T: MATTE TIN OVER ENTIRE CONTACT
-LTL: 10µ" SELECTIVE GOLD IN CONTACT AREA,
TIN LEAD (90/10 ±5%) TAIL
-SM: 30µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN TAIL
-LM: 10µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN TAIL
-FM: 3µ" SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN TAIL
-TM: MATTE TIN OVER ENTIRE CONTACT
-H: 30µ" GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
POLARIZING OPTION
-XXX INDICATES POSITION No
(USE PK-07-N)
OPTION
-LC: LOCKING CLIP
(NOT AVAILABLE ON -SV)
(USE LC-06-TM, SEE FIG 1,
FIG 2 & 3, SHT 2 & NOTES 6 & 7)
-P: PICK & PLACE PAD
(ONLY AVAILABLE ON -SV & -DV, 4 POS MIN)
(-SV: USE PPP-09; -DV: USE PPP-03;
SEE FIG 5, SHT 2)
-M: METAL PICK & PLACE PAD
(ONLY AVAILABLE ON -DV)
(USE LMP-03, SEE FIG 7, SHT 3)
-A: MOLDED ALIGNMENT PIN
(AVAILABLE ON -DV ONLY)
(USE MMS-XX-D-VXX, SEE FIG 4, SHT 3)
-K: POLYIMIDE FILM PAD
(AVAILABLE ON 3 POS MIN,
FOR -SV USE K-DOT-.118-.219-.005,
FOR-DV USE K-DOT-.217-.313-.005)
(SEE FIG 6, SHT 3)
-TR: TAPE & REEL PACKAGING
(SEE FIG 8, SHT 4)
(AVAILABLE ON 2-36 POS ONLY)
(No. OF POS x .0787[2.000]) + .022[0.56]
-
.015
+
.005
(TOL ACCUM)(SEE NOTES 6 & 9)
.1750 4.445
REF
(No OF POS - 2) x .07874[2.0000])
.056 1.42
REF (TYP)
SEE NOTE 11
.1574 3.998
REF
01
02
79
80
-DV-LC
90°
-
0°
+
7°
.1770
-
.002
+
.004
4.496
-
0.051
+
0.102
(SEE NOTE 8)
.048
(TYP)
1.22
.010
REF
0.25
.055 1.40
C
C-63-22-XXX
-DV-LC
MMS-40-D
C
LC-06-X
.006[0.15]
.0787
REF
2.000
01
02 40
-SV
90°
-
0°
+
7°
.048
(TYP)
1.22
.1770
-
.0020
+
.0040
4.496
-
0.051
+
0.102
(SEE NOTE 8)
C
C-63-22-XXX
-SV
MMS-40-S
C
.006[0.15]
.232
-
.000
+
.005
5.89
0.00
+
0.13
C-63-22-XXX
-DV
IN-PROCESS
.232
-
.000
+
.005
5.89
0.00
+
0.13
C-63-22-XXX
-SV
C
FIG 1
MMS-140-02-XXX-XV-LC SHOWN
**
**
** = AVAILABLE TO EXISTING CUSTOMERS ONLY
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 2
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
MATERIAL:
2mm SURFACE MOUNT BOX CONNECTOR STRIP ASM
BY:
MMS-1XX-02-XXX-XX-XX-XXX
DWG. NO.
DESCRIPTION:
DO NOT SCALE DRAWING
BRATCHER
04/01/1994
4
1
SHEET SCALE: 3:1
INSULATOR: VECTRA E130i, COLOR: BLACK
CONTACT: PHOS BRONZE
F:\DWG\MISC\MKTG\MMS-1XX-02-XXX-XX-XX-XXX-MKT.SLDDRW
NOTES:
1. REPRESENTS A CRITICAL DIMENSION.
2. MAXIMUM ALLOWABLE SWAY: 2° IN EITHER DIRECTION
3. MAXIMUM BURR ALLOWANCE: .003[0.08]
4. MAXIMUM CUT FLASH: .020[0.51].
5. MINIMUM RETENTION FORCE: SINGLE ROW: .5 LB, DOUBLE ROW: 1 LB
6. CUT BODIES FROM MMS-40-D OR MMS-40-S FOR ALL STYLES EXCEPT -LC.
FOR -LC, USE POSITIONALIZED BODIES. 3 POSITION -DV-LC PARTS WILL HAVE 1 LOCKING CLIP.
7. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE -LC OPTION IS
NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS MANUAL
PLACEMENT FOR ALL ASSEMBLIES WITH THE -LC OPTION.
8. THIS DIMENSION TO BE MEASURED AT BEND.
9. FOR -SV LEAD STYLE, EVEN POSITON CUTS LOSE 2 POSITIONS PER CUT; ODD
POSITION CUTS LOSE 1 POSITION PER CUT.
10. LEAD STYLE -02-SH, POSITIONS 2 THRU 4 TO BE PACKAGED IN BOXES. ALL OTHER ROW
SPECIFICATIONS SHOULD BE TUBED ACCORDING TO TABLE 2, REGARDLESS OF POSITION.
11. PK-07-N TO BE INSERTED FROM THIS SIDE.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
REVISION CP
