55/031A-30-9

Users should evaluate the suitability of this product for their application. Specications are subject to change without notice.

Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specication, without notication to Buyer.

1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE

ADDED TO THE PART NUMBER. AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.

Page 1 of 2

The TE logo, Tyco Electronics and Raychem are trademarks.

Raychem Wire & Cable

501 Oakside Avenue

Redwood City, CA 94063-3800

SIZE

(AWG)

CONDUCTOR

STRANDING

(number x AWG)

DIAMETER OF

STRANDED

CONDUCTOR

(in.)

FINISHED WIRE

(lbs/1000 ft.)

55/031A-32-* 32 7 x 40 .0089 .0096 262. .0173 ± .0011 .37

55/031A-30-* 30 7 x 38 .0116 .0123 156. .0200 ± .0011 .54

55/031A-28-* 28 7 x 36 .0146 .0153 98.7 .0230 ± .0011 .77

55/031A-26-* 26 19 x 38 .0188 .0200 57.5 .0275 ± .0012 1.25

TABLE II. PERFORMANCE DETAILS

PART NUMBER

1/

BEND TESTING

MANDREL DIAMETER

(inch) (± 3%)

LIGHTWEIGHT, OUTER SPACE, 600 VOLT

5-21-09 H

This specication sheet forms a part of the latest issue of Raychem Specication 55/.

TITLE

Date Revision

JACKET - LOW OUTGASSING

RADIATION-CROSSLINKED,

TEMPERATURE RATING: 200°C

Maximum continuous conductor temperature

VOLTAGE RATING: 600 volts (rms) at sea level

CROSSLINKING VERIFICATION: 300 ± 3°C for 1 hour

COLOR: White preferred

CONCENTRICITY: 80% (minimum)

IDENTIFICATION AND COLOR STRIPING DURABILITY:

125 cycles (250 strokes) (minimum), 500 g weight

INSULATION ELONGATION: 50% (minimum)

VACUUM STABILITY:

Total Mass Loss (TML), 1.00% (maximum)

Volatile Condensable Material (VCM), 0.10% (maximum)

VOLTAGE WITHSTAND TEST (Post Environmental): 1500 volts (rms), 60 Hz, 5 minutes

PART NUMBER:

The “*” in the part numbers on page 1 shall be replaced by a color code designator.