6499

USA: Sales: 800-490-2361
Technical Support: technicalsupport@pomonatest.com
Fax: 425-446-5844
Europe: 31-(0) 40 2675 150 International: 425-446-5500
Where to Buy: www.pomonaelectronics.com
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks are
the property of their respective companies.
Copyright © 2008 D2015570 Rev. 001 Page 1 of 1
Model 6499
Modular Passive Oscilloscope Probe
Model 6499
Modular Passive Oscilloscope Probe
Accessories included with Probe:
Features
This probe is recommended for general purpose
probing applications and is adjustable for low
frequencies.
The probe's entire core is made of a high quality
ceramic hybrid.
Pure coaxial design and laser trimmed resistors
ensure highest signal fidelity along the signal path
offering high bandwidth and fast risetimes for
accurate impulse measurements.
Switchable probes offer unbreakable coaxial reed
switches for changing between attenuation modes.
Our passive probes are spring loaded, with needle
sharp tips to support precise and safe
measurements.
Probe tips are interchangeable and can be replaced
easily.
Accessories (one of each) included with Probe are:
Ground Blade
Ground Lead with Alligator Clip 22 cm (8.66”)
IC Caps: 0.8mm, 1.0mm, and 1.27mm pitch
Insulating Cap (green)
Protection Cap
Solid Tip 0.8mm (0.0315”)
Spring Tip 0.8mm (0.0315”)
Sprung Hook
Adjustment Tool
Copper (Cu) Pads
Specifications
Attenuation Ratio 1:1 10:1
Maximum Input
Voltage CAT II¹
55 Vrms 300 Vrms
Scope Bandwidth
MHz
60
Probe Bandwidth
MHz (-3 dB)
20 150
System Risetime
(ns)
< 18 < 2.4
Probe Input
Resistance (M)
1 10
Probe Input
Capacitance (pF)
< 78 < 13
Compensation
Range (pF)
- 15 - 40
Cable Length
4 ft. (1.2 m)
1 Rating: Per IEC 61010-031. Maximum voltage allowed on the low or ground
connection including shell and housing must not exceed 30 V.
Ordering Information
Model: 6499
20/150 MHz X1/X10 Scope Probe

6499

Mfr. #:
Manufacturer:
Pomona Electronics
Description:
TEST PROBE, Oscilloscope Probe Function:Passive, Bandwidth:150MHz, Input Voltage Max:300V, Test Probe Attenuation:1:1, 10:1, For Use With:General Purpose Oscilloscopes, Product Range:-, Cable L
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet