SIGNUM SYSTEMS C ORPORATION
JTAG Probes for Signum Emulators
Technical
Specifications
JTAG
series
COPYRIGHT NOTICE
Copyright (c) 2012 by Signum Systems Corporation, an IAR Systems company. All rights are reserved worldwide. No part
of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual,
or otherwise, without the prior written permission of Signum Systems.
DISCLAIMER
Signum Systems makes no representations or warranties with respect to the contents hereof and specifically disclaims any
implied warranties of merchantability or fitness for any particular purpose. Also, Signum Systems reserves the right to
revise this publication and to make changes from time to time in the content hereof without obligation of Signum
Systems to notify any person or organization of such revision or changes.
WARRANTY
Signum Systems warrants to the original purchaser that this product is free of defects in material and workmanship and
performs to applicable published Signum Systems specifications for a period of SIX MONTHS from the date of
shipment. If defective, the product must be returned to Signum Systems, prepaid, within the warranty period, and it will
be repaired or replaced (at our option) at no charge. Equipment or parts which have been subject to misuse, abuse,
alteration, neglect, accident, unauthorized installation or repair are not covered by warranty. This warranty is in lieu of any
other warranty expressed or implied. IN NO EVENT SHALL SIGNUM SYSTEMS BE LIABLE FOR
CONSEQUENTIAL DAMAGES OF ANY KIND. It is up to the purchaser to determine the reliability and suitability of
this product for his particular application.
1211 FLYNN RD., UNIT #104
CAMARILLO, CA 93012, U.S.A
PHONE 805 383 3682
WWW.SIGNUM.COM
JTAG PROBES FOR SIGNUM EMULATORS
TECHNICAL SPECIFICATIONS
1
Signum JTAG Probes at a Glance
PART
NUMBER
VOLTAGE PINO U T CPU DESCRIPTION P G
ADA-JET-ARM20
3.3 – 5.0V (± 10%)
ARM20
Standard 20-pin ARM JTAG probe.
2
ADA-JET-ARM14
3.3 – 5.0V (± 10%)
ARM20
ARM14
Standard 20-pin ARM JTAG probe with 14-
pin passive extender.
2
ADA-JET-ARM20-LV
1.8 – 3.3V (± 10%)
ARM20
Low voltage version of ADA-JET-ARM20.
3
ADA-JET-ARM-SWD
0.8 – 5.0V (± 10%)
ARM20
Cortex20
Cortex10
Cortex-A/R/M
Low-voltage probe with Cortex-M SWD and
SWO capabilities.
5
ADA-ARM20-Cortex
N/A (passive)
Cortex20
Cortex10
Conversion adapter from ADA-JET-ARM20
and ADA-JET-ARM20-LV probe to Cortex
20-pin and Cortex 10-pin connectors.
7
ADA-JET-TI14
3.3 – 5.0V (± 10%)
TI14
Instruments
*
Standard 14-pin JTAG probe for Texas
Instruments DSP and ARM-based
processors.
8
ADA-JET-TI14-LV
1.8 3.3V (± 10%)
TI14
Low voltage version of ADA-JET-TI14.
8
ADA-ISO-TI14
3.0 – 5.0V (± 10%)
TI14
**
JTAG isolation probe for Texas Instruments
DSP and ARM-based processors.
9
ADA-ISO-TI14-E
3.3 – 5.0V (± 10%)
TI14
Instruments
**
JTAG isolation probe for Texas Instruments
DSP and ARM-based processors with
optional External Power Input.
11
ADA-JET-CTI20
1.8 3.3V (± 10%)
cTI20
Instruments*
Low-voltage compact 20-pin JTAG probe for
Texas Instruments DSP and ARM-based
processors.
12
ADA-ETM-JTAG
N/A (passive)
ETM38
ARM20
TI14
Conversion ETM to JTAG adapter. Allows
JTAGjet-Trace emulators to be used with
boards without ETM connector.
15
ADA-ETM-SWD20
N/A (passive)
Cortex20
Conversion adapter to Cortex 20-pin
connector. To be used with JTAGjet-Trace
emulators.
16
ADA-JET-MPSD
5.0 V (± 10%)
MPSD
12-pin TI MPSD (legacy) probe.
17
TABLE 1 Comparison of selected Signum JTAG probes.
*
Any Texas Instruments TMS320 DSP and ARM-based CPU including C2000, C5000, C6000, TMS470, TMS570, OMAP,
DaVinci and Sitara. Consult your CPU/board documentation and for JTAG connector and voltage requirements. Some boards
with Texas Instruments CPUs may also have standard ARM 20-pin connector.
**
Isolation probe can be used with any Texas Instruments device, but it is limited to 15MHz JTAG clock.
PROBE
PINOUT
PROBE
PINOUT
ARM20
Figure 2 on page 2
TI14
Figure 18 on page 8
ARM14
Figure 4 on page 2
cTI20
Figure 30 on page 12
Cortex20
Figure 13 on page 5
ETM38
Figure 35 on page 14
Cortex10
Figure 14 on page 5
MPSD
Figure 44 on page 17
TABLE 2 Signum probe pinouts.

ADA-JET-ARM14

Mfr. #:
Manufacturer:
IAR Systems
Description:
Sockets & Adapters Active Probe ARM-14
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet