SIGNUM SYSTEMS
4
FIGURE 8 The 20-pin JTAG ADA-JET-ARM20-LV
probe for ARM.
FIGURE 9 The pinout of the ADA-JET-
ARM20-LV probe. Top view.
Cable Extender
In addition to its standard version shown on page 3, the 20-pin probe is offered in a version with a 1.55 in.
ribbon cable extender that allows the probe to remain outside the target board by lowering the probe’s profile.
(The 14-pin probe comes always with a ribbon cable extender.)
Ribbon Cable
H
D
C
L
W
Cable to Emulator
FIGURE 10 Top and side views of the 20-pin ARM probe with a cable extender. L = 69 mm (2.7
in.), C = 40.0 mm (1.55 in) D = 6.0 mm (.24), W = 30.0 mm (1.2 in.), H = 11.5 mm (0.45 in.).
Target Board Header
On the target board, we recommend using a polarized box header, such as:
TABLE 3 Recommended target
board headers.
14- PIN 20- PIN
14-Pin, Double-Row, Polarized Box
Header-Straight, .100" × .100" (2.54
mm × 2.54 mm). Manufacturers:
3M
(Mouser Electronics, Part No.
517—2514-6002).
tyco/AMP, Part No. 103308-2 –
Digi-Key Part No A26269-ND.
20-Pin, Double-Row, Polarized Box
Header-Straight, .100" × .100" (2.54
mm × 2.54 mm). Manufacturers:
3M (Mouser Electronics, Part No.
517—2520-6002).
tyco/AMP, Part No. 103308-5 –
Digi-Key Part No. A26273-ND.