DATA SHEET
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
PHOTOCOUPLER
PS8502,PS8502L1,PS8502L2,PS8502L3
HIGH SPEED ANALOG OUTPUT TYPE
8 mm CREEPAGE 8-PIN PHOTOCOUPLER
Document No. PN10657EJ04V0DS (4th edition)
Date Published September 2009 NS
Printed in Japan
−NEPOC Series−
2007, 2009
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
DESCRIPTION
The PS8502, PS8502L1, PS8502L2 and PS8502L3 are 8-pin high speed photocouplers containing a GaAIAs LED
on input side and a PN photodiode and a high speed amplifier transistor on output side on one chip. The PS8502 is in
a plastic DIP (Dual In-line Package) with 8 mm creepage distance product.
The PS8502L1 is lead bending type for long creepage distance.
The PS8502L2 is lead bending type for long creepage distance (Gull-wing) for surface mount.
The PS8502L3 is lead bending type (Gull-wing) for surface mounting.
FEATURES
• Long creepage distance (8 mm MIN.: PS8502L1, PS8502L2)
• High common mode transient immunity (CM
H, CML = ±15 kV/
μ
s MIN.)
• High supply voltage (V
CC = 35 V MAX.)
• High speed response (t
PHL, tPLH = 0.8
μ
s MAX.)
• High isolation voltage (BV = 5 000 Vr.m.s.)
• TTL, CMOS compatible with a resistor
• Ordering number of tape product: PS8502L2-E3: 1 000 pcs/reel
: PS8502L3-E3: 1 000 pcs/reel
• Pb-Free product
• Safety standards
• UL approved: No. E72422
• CSA approved: No. CA 101391 (CA5A, CAN/CSA-C22.2 60065, 60950)
• BSI approved: No. 8937, 8938
• SEMKO approved: No. 615433
• NEMKO approved: No. P06207243
• DEMKO approved: No. 314091
• FIMKO approved: No. FI 22827
• DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40019182 (Option)
APPLICATIONS
• Interface for measurement or control equipment
• Substitutions for relays and pulse transformers
• Modem, communications device
• General purpose inverter
1. NC
2. Anode
3. Cathode
4. NC
5. Emitter
6. V
O
7. NC
8. V
CC
12 43
6587
SHIELD
PIN CONNECTION
(Top View)
<R>
<R>