PS9114
ORDERING INFORMATION
Part Number Order Number Solder Plating
Specification
Packing Style Safety Standard
Approval
Application Part
Number
*1
PS9114 PS9114-A Pb-Free
*2
Magazine case 100 pcs Standard products PS9114
PS9114-F3 PS9114-F3-A Embossed Tape 2 500 pcs/reel (UL approved)
PS9114-F4 PS9114-F4-A
PS9114-V PS9114-V-A Magazine case 100 pcs DIN EN60747-5-2
PS9114-V-F3 PS9114-V-F3-A Embossed Tape 2 500 pcs/reel (VDE0884 Part2)
PS9114-V-F4 PS9114-V-F4-A Approved (Option)
*1 For the application of the Safety Standard, following part number should be used.
*2 With regards to terminal solder (the solder contains lead) plated products (conventionally plated), contact your
nearby sales office.
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter Symbol Ratings Unit
Diode
Forward Current
*1
IF 30 mA
Reverse Voltage VR 5 V
Detector
Supply Voltage VCC 7 V
Output Voltage VO 7 V
Output Current IO 25 mA
Power Dissipation
*2
PC 40 mW
Isolation Voltage
*3
BV 2 500 Vr.m.s.
Operating Ambient Temperature TA −40 to +85 °C
Storage Temperature Tstg −55 to +125 °C
*1 Reduced to 0.3 mA/°C at T
A = 25°C or more.
*2 Applies to output pin V
O. Reduced to 1.5 mW/°C at TA = 65°C or more.
*3 AC voltage for 1 minute at T
A = 25°C, RH = 60% between input and output.
Pins 1-2 shorted together, 3-4 shorted together.
RECOMMENDED OPERATING CONDITIONS
Parameter Symbol MIN. TYP. MAX. Unit
Low Level Input Voltage VFL 0 0.8 V
High Level Input Current IFH 6.3 10 12.5 mA
Supply Voltage VCC 4.5 5.0 5.5 V
TTL (RL = 1 kΩ, loads) N 5
Pull-up resistor RL 330 4 k
Ω
Data Sheet PN10266EJ02V0DS
3