CUSTOMER DRAWING
REV:
B
REVISED PER
ECO-12-013539
DATE:
July 26, 2012
2012 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights reserved.
TE Connectivity
300 Constitution Drive
Menlo Park, CA 94025, USA
TITLE:
HEXASHIELD ADAPTOR FOR
CODE 40 CONNECTORS
(TINEL CLAMPING NUT)
UNLESS OTHERWISE SPECIFIED
DIMENSIONS ARE IN
MILLIMETERS.
INCH DIMENSIONS ARE SHOWN IN
BRACKETS
Tyco Electronics reserves the right to amend this drawing at
any time. Users should evaluate the suitability of the
product for their application.
DOCUMENT NO.
HEX40-AY-YY-YY-AYY-2-YY
DRAWN:
IRT
DATE:
FEB 03
FILE:
T31747
SCALE:
NONE
SHEET:
4 OF 4
If this document is printed it becomes uncontrolled. Check for the latest revision
PACKAGING
- All components are supplied in a plastic bag.
NOTES!
1. Item 4 - Star - is not
supplied with Hexashield Order Number 09.
2. The DS option, illustrated below, is for a Drilled Star that is available on sizes 15 to 25 only. This option is to allow
unshielded wires to pass through the assembly.
øJ MAX
STAR SIZE 15 17 19 21 23 25
ØJ MAX 3.0 6.0 9.0 12.0 15.0 18.0
[0.12”] [0.24”] [0.35”] [0.47”] [0.59”] [0.71”]
3. Where the ferrule quantities required are standard, the item 4 - Star - is also standard.
If the optional quantity is selected then 2 items 4 will be supplied - one “split” and the other one standard*,
See below for illustration.
EXAMPLE: FERRULE QUANTITY CODE -A13
-A13 = -A10 SPLIT STAR + -A3 STANDARD STAR
* On Order Number 19 only, the Optional Ferrule quantity of 8 uses a “standard” star also.
4. Assembly is to be permanently marked with Code Identity Number and Part Number.
(e.g. 06090 HEX40-AB-00-21-A9-2)
