https://www.phoenixcontact.com/pi/products/2834012
08/20/2018Page2/4
Single relay-REL-IR/LDP- 12DC/2X21-2834012
Technical data
Coil side
Typical release time 14 ms
Coil resistance 160 Ω ±15 % (at 20 °C)
Power dissipation for nominal condition 0.9 W
Contact side
Contact type 2 PDT
Type of switch contact Single contact
Contact material Ag
Maximum switching voltage 250 V AC/DC
Minimum switching voltage 5 V
Min. switching current 1 mA
Maximum inrush current 20 A (15 ms)
Limiting continuous current 10 A
Interrupting rating (ohmic load) max. 2500 VA (for 250 V AC)
General
Test voltage relay winding/relay contact 2 kV AC (50 Hz, 1 min.)
Test voltage relay contact/relay contact 2 kV AC (50 Hz, 1 min.)
Operating mode 100% operating factor
Degree of protection RT I
Mechanical service life
5x 10
7
cycles
Mounting position any
Assembly instructions On relay base PR2
Standards and Regulations
Standards/regulations DIN EN 61810-1
VDE 0435-201
EN 50178
Degree of pollution 2
Overvoltage category II
Environmental Product Compliance
China RoHS Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings