74AHC_AHCT377_2 © NXP B.V. 2008. All rights reserved.
Product data sheet Rev. 02 — 12 June 2008 5 of 16
NXP Semiconductors
74AHC377; 74AHCT377
Octal D-type flip-flop with data enable; positive-edge trigger
6. Functional description
[1] H = HIGH voltage level;
h = HIGH voltage level one set-up time prior to the LOW-to-HIGH CP transition;
L = LOW voltage level;
l = LOW voltage level one set-up time prior to the LOW-to-HIGH CP transition;
↑ = LOW-to-HIGH CP transition;
X = don’t care.
7. Limiting values
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] For SO20 packages: above 70 °C the value of P
tot
derates linearly at 8 mW/K.
For TSSOP20 packages: above 60 °C the value of P
tot
derates linearly at 5.5 mW/K.
Table 3. Function table
[1]
Operating mode Control Input Output
E CP Dn Qn
Load 1 l ↑ hH
Load 0 l ↑ lL
Hold (do nothing) h ↑ X no change
H X X no change
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol Parameter Conditions Min Max Unit
V
CC
supply voltage −0.5 +7.0 V
V
I
input voltage −0.5 +7.0 V
I
IK
input clamping current V
I
< −0.5 V
[1]
−20 - mA
I
OK
output clamping current V
O
< −0.5 V or V
O
> V
CC
+ 0.5 V
[1]
−20 +20 mA
I
O
output current V
O
= −0.5 V to (V
CC
+ 0.5 V) −25 +25 mA
I
CC
supply current - +75 mA
I
GND
ground current −75 - mA
T
stg
storage temperature −65 +150 °C
P
tot
total power dissipation T
amb
= −40 °C to +125 °C
[2]
- 500 mW