TB-9054 Page 4 of 12
Statguard Flooring - One Colgate Way, Canton, MA 02021 • (781) 821-8370 • Web Site: StatguardFlooring.com
© 2017 DESCO INDUSTRIES INC.
Employee Owned
Inhalation: Remove victim to fresh air if effects occur. If not breathing, give artificial
respiration. Get immediate medical attention.
Ingestion: Do not induce vomiting. If patient is conscious and can swallow, give two
glasses of water (16oz.). Get immediate medical attention. Never give
anything by mouth to an unconscious or convulsing person.
Most Important symptoms/effects, acute and delayed:
Signs and Symptoms: Irritation as noted above. Skin sensitization (allergy) may be evidenced by
rashes, especially hives.
Aggravated medical conditions: Pre-existing skin and eye disorders may be aggravated by exposure to this
product. Preexisting skin and lung allergies may increase the chance of
developing increased allergy symptoms from exposure to this product.
Other Health Effects: Based on animal studies, repeated exposure to components of this
product may cause damage to liver, kidney, and respiratory systems.
Reports have associated repeated and prolonged occupational exposure
to solvents with permanent brain and nervous system damage. Intentional
misuse by deliberately concentrating and inhaling vapors may be harmful
or fatal.
Indication of immediate Contact a poison control center for additional treatment information. As a
medical attention and precaution, exposure to liquids, vapors, mists, or fumes should be
special treatment needed, minimized.
if necessary:
SECTION 5 — FIREFIGHTING MEASURES
Suitable extinguishing media: Use alcohol type foam, dry chemical, or CO2.
Specific hazards arising from Flash Point is 93°F TCC. None Known.
the chemical:
Special protective actions Use water spray to cool fire Exposed surfaces and to protect personnel. If
for fire-fighters: a leak or spill has not ignited, use ER spray to disperse the vapors.
Contain the runoff stream. Try to cover liquid pills with foam. Do not enter
confined fire space without full bunker gear (helmet with face shield,
bunker coats, gloves, and rubber boots), including a positive pressure
IOSH approved self contained breathing apparatus.
SECTION 6 — ACCIDENTAL RELEASE MEASURES
Personal precautions, Ventilate the area. Avoid breathing vapor. Use self-contained breathing
protective equipment and apparatus or supplied air for large spills or confined areas.
emergency procedures:
Methods and materials for Contain spill if possible. Wipe up or absorb on suitable material and pick
containment and clean up: up with shovels. Do not use sawdust, wood chips, or other cellulosic
materials to absorb the spill. Prevent entry into sewers and waterways.
Dispose of in accordance with federal, state, and local regulations.
SECTION 7 — HANDLING AND STORAGE
Precautions for safe handling: Ground all transfer equipment. Take precautionary measures against static
discharge. Handle as an industrial chemical.
Conditions for safe storage, Ground all transfer equipment. Take precautionary measures against
including any incompatibilities: static discharge. Handle as an industrial chemical. Keep container tightly
closed when not in use. Practice good caution and personal cleanliness
to avoid skin and eye contact. Hold bulk storage under nitrogen blanket.
Store in a cool, dry place with adequate ventilation. Keep away from open
flames and high temperatures.
TB-9054 Page 5 of 12
Statguard Flooring - One Colgate Way, Canton, MA 02021 • (781) 821-8370 • Web Site: StatguardFlooring.com
© 2017 DESCO INDUSTRIES INC.
Employee Owned
SECTION 8 — EXPOSURE CONTROLS/PERSONAL PROTECTION
Control parameters
Component CAS No. Percent Exposure Limits Source
Reaction products of epichlorohydrin and
bisphenol A
25085-99-8 70-80% None established
Epoxy resin 28064-14-4 10-15% None established
Amorphous silica 112945-54-5 <5% 5 mg/m3 TWA, Respirable OSHA
Ethanol 64-17-5 <10% 1000 ppm TWA OSHA
Appropriate engineering controls: N/A
Individual protection measures, such as personal protective equipment:
Respiratory Protection: Provide adequate ventilation. Avoid breathing of vapors or mists. Airborne
concentrations should be kept to lowest levels possible. When exposures
are not adequately controlled, use an approved respirator. Selection of
air-purifying or positive-pressure supplied air will depend on the specific
operation and the potential airborne concentration of material. For
emergency conditions, use an approved positive-pressure self-contained
breathing apparatus.
Protective Clothing: Protective clothing such as uniforms, coveralls, or lab coats must be
worn. Launder or dryclean when soiled. Gloves and goggles resistant
to chemicals and petroleum distillates required. When handling large
quantities, impervious suits, gloves, and rubber boots must be worn.
SECTION 9 — PHYSICAL AND CHEMICAL PROPERTIES
Appearance (physical state, color, etc.): Clear/White Paste
Odor: Little to No Odor
Odor threshold: N/A
pH: N/A
Melting point/freezing point: N/A
Initial boiling point and boiling range: Not Determined
Flash Point: 93°F TCC
Evaporation rate: Not Determined
Flammability (solid, gas): N/A
Upper/lower flammability or explosive N/A
limits:
Vapor pressure: Not Determined
Vapor Density: Not Determined
Relative density (specific gravity): 1.148
Solubility(ies): Not Soluble (Water)
Partition coefficient; n-octanol/water: N/A
Auto-ignition temperature: N/A
Decomposition temperature: N/A
Viscosity: N/A
SECTION 10 — STABILITY AND REACTIVITY
Reactivity: N/A
Chemical stability: Excess heating over long periods of time degrades the resin.
Possibility of hazardous reactions: Will not occur by itself, but masses of more than 1 pound of product plus
an aliphatic amine will cause irreversible polymerization with considerable
heat buildup.
Conditions to avoid: Avoid exposure to heat, light, flame, or other sources of ignition. Can
react vigorously with strong oxidizing agents, strong lewis or mineral
acids, and strong mineral and organic base/especially primary and
secondary amines. Reaction with some curing agent may produce
considerable heat.
TB-9054 Page 6 of 12
Statguard Flooring - One Colgate Way, Canton, MA 02021 • (781) 821-8370 • Web Site: StatguardFlooring.com
© 2017 DESCO INDUSTRIES INC.
Employee Owned
Incompatible materials: N/A
Hazardous decomposition products: Hazardous combustion products may include intense heat, dense black
smoke, carbon monoxide, carbon dioxide, as well as organic compounds
of unknown structure.
SECTION 11 — TOXICOLOGICAL INFORMATION
Likely routes of exposure: N/A
Symptoms related to the physical, chemical and toxicological characteristics:
Eye Contact: Irritating and will injure eye tissue if not removed promptly.
Skin Contact: May cause irritation. Has been known to cause allergic skin reaction in
humans. Prolonged contact may cause blisters.
Inhalation: High vapor concentrations are irritating to the eyes and respiratory tract,
may cause headaches and dizziness.
Ingestion: Oral toxicity is considered to be extremely low.
Delayed and immediate effects and N/A
also chronic effects from short and
long term exposure:
Numerical measures of toxicity:
Ingredient Name CAS No. Percent Acute Oral LD50 Acute Oral LD50 Acute Inhalation
LC50
Reaction products of
epichlorohydrin and
bisphenol A
25085-99-8 70-80% >5.0 g/kg (rat) >6.0 g/kg (rat) Not available
Epoxy resin 28064-14-4 10-15% >5.0 g/kg (rat) >3.0 g/kg (rat) >1.7 mg/L (rat)
Amorphous silica 112945-54-5 <5% >5000 mg/kg (rat) No data No data
Ethanol 64-17-5 <10% Not available Not available Not available
SECTION 12 — ECOLOGICAL INFORMATION
Ecotoxicity: N/A
Persistence and degradability: N/A
Bioaccumulative potential: N/A
Mobility in soil: N/A
Other adverse effects: N/A
SECTION 13 — DISPOSAL CONSIDERATIONS
Disposal methods: Dispose of in accordance with federal, state, and local regulations.
SECTION 14 — TRANSPORT INFORMATION
UN number: UN 1866
UN proper shipping name: UN 1866, Resin Solution, Flammable, 3, PG III
Transport hazard class(es): 3
Packing group, if applicable: III
Environmental hazards: N/A
Transport in bulk: N/A
Special precautions for user: N/A

8403

Mfr. #:
Manufacturer:
Description:
HEX STANDOFF #4-40 ALUMINUM 3/4"
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet