NFZ03SG501SN10D Datasheet NFZ03SG501SN10D, NFZ03SG102SN10D | P1-P3

Spec.No.JENF243J-0016A-01 P1/7

MURATA MFG.CO.,LTD.

Reference Only

CHIP NOISE FILTER NFZ03SG□□□SN10□ REFERENCE SPECIFICATION

1.Scope

This reference specification applies to Chip Ferrite Bead NFZ03SG Series.

2.Part Numbering

(ex) NF Z 03 SG 331 S N 1 0 D

Product ID Structure Dimension Characteristics Typical Impedance Performance Category Numbers special Packaging

(L×W) at 900MHz of speci-

Circuit fication *

3.Rating

Customer

Part Number

MURATA

Part Number

Impedance (Ω)

(Under Standard

Testing Condition)

DC Resistance

(Ω)

Rated

Current

(mA)

at 900MHz at 1.7GHz

Typ. Min.

Typ.

Typ. Max.

NFZ03SG331SN10D

330 200 400 0.46 0.6 305

NFZ03SG331SN10B

NFZ03SG501SN10D

500 300 600 0.56 0.73 275

NFZ03SG501SN10B

NFZ03SG671SN10D

670 400 800 0.69 0.88 250

NFZ03SG671SN10B

NFZ03SG102SN10D

1000 600 900 1.00 1.30 210

NFZ03SG102SN10B

NFZ03SG162SN10D

1600 960 1200 1.30 1.70 180

NFZ03SG162SN10B

■Operating Temperature : -55°C to +125°C ■Storage Temperature : -55°C to +125°C

4.Style and Dimensions

■ Equivalent Circuit

■ Unit Mass(Typical value)

(in mm) 0.300mg

5.Marking

No marking.

6.Standard Testing Conditions

< Unless otherwise specified > < In case of doubt >

Temperature : Ordinary Temp. (15 °C to 35 °C ) Temperature : 20°C±2 °C

Humidity : Ordinary Humidity (25%(RH) to 85%(RH)) Humidity : 60%(RH) to 70%(RH)

Atmospheric pressure : 86kPa to 106kPa

7.Specifications

7-1.Electrical Performance

No. Item Specification Test Method

7-1-1 Impedance Meet item 3.

Measuring Frequency : 900MHz, 1.7GHz±1MHz

Measuring Equipment : KEYSIGHT 4991A

or the equivalent

Test Fixture : KEYSIGHT 16192A /16197Aor their equivalents

7-1-2 DC Resistance Measuring Equipment : Digital multi mete

*Except resistance of the Substrate and Wire

:Electrode

0.6±0.03

0.3±0.03

0.15±0.05

0.3±0.03

Resistance element becomes

dominant at high frequencies.

()

D:Taping

B: BULK

0：ＨighImpedance

Spec.No.JENF243J-0016A-01 P2/7

MURATA MFG.CO.,LTD.

Reference Only

7-2.Mechanical Performance

No. Item Specification Test Method

7-2-1 Bonding

Strength

Products shall not be damaged

after tested as test method.

It shall be soldered on the substrate.

Applying Force(F) : 2N

Applying Time : 5s

7-2-2 Bending

Strenght

It shall be soldered on the Glass-epoxy substrate.

Substrate : 100mm×40mm×0.8mm

Deflection : 2.0mm

Speed of Applying Force : 1.0mm/s

Keeping Time : 20s

(in mm)

7-2-3 Vibration

Appearance: No damage It shall be soldered on the substrate.

Oscillation Frequency : 10Hz to 2000Hz to 10Hz for 20min

Total amplitude 3.0mm or Acceleration

amplitude 196 m / s

whichever is smaller.

Testing Time:A period of 2h in each of

3 mutually perpendicular directions.(Total 6h)

7-2-4 Solderability The electrodes shall be at

least 95% covered with new

solder coating.

Flux : Ethanol solution of rosin,25(wt)%

Pre-Heating : 150°C, 60s

Solder : Sn-3.0Ag-0.5Cu

Solder Temperature : 245°C±3°C

Immersion Time : 3s

7-3.Environmental Performance

It shall be soldered on the substrate.

No. Item Specification Test Method

7-3-1 Heat Life Meet Table 1.

Table 1

Appearance No damage

Impedance

Change

(at 900MHz)

Within ±30%

Temperature : 125°C±2°C

Applying Current : Rated Current

Time : 1000h(+48h,-0h)

Then measured after exposure in the room

condition for 4 to 48 h.

7-3-2 Cold

Resistance

Temperature : -55°C±2°C

Time : 1000h(+48h,-0h)

Then measured after exposure in the room

condition for 4 to 48 h.

7-3-3 Humidity Temperature : 40°C±2°C

Humidity : 90%(RH) to 95%(RH)

Time : 1000h(+48h,-0h)

Then measured after exposure in the room

condition for 4 to 48 h.

7-3-4 Temperature

Cycle

1 cycle :

1 step : -55 °C(+0 °C,-3 °C) /30min(+3min,-0min)

2 step : Ordinary temp. / 3 min max.

3 step : +125 °C(+3 °C,-0 °C) / 30min(+3min,-0min)

4 step : Ordinary temp. / 3 min max.

Total of 100 cycles

Then measured after exposure in the room

condition for 4 to 48 h.

Deflection

Product

R230

Pressure jig

Spec.No.JENF243J-0016A-01 P3/7

MURATA MFG.CO.,LTD.

Reference Only

0.55max.

0.36(Typ.)

0.66(Typ.)

4.0±0.1

1.5

+0 .1

-0

1.75±0.1

8.0±0.3

Direction of Feed

3.5±0.05

2.0±0.05

8.Specification of Packaging

8-1.Appearance and Dimensions (8mm-wide paper tape)

(in mm)

(1) Taping

Products shall be packaged in the each embossed cavity of 8mm-wide, 2mm-pitch and plastic tape

continuously and sealed by cover tape.

(2) Sprocket hole : The sprocket holes are to the right as the tape is pulled toward the user.

(3) Spliced point : The cover tape has no spliced point.

(4) Missing components number

Missing components number within 0.1% of the number per reel or 1 pc., whichever is greater,

and are not continuous. The specified quantity per reel is kept.

8-2.Tape Strength

(1)Pull Strength

Cover tape 5N min

(2)Peeling off force of Cover tape

0.1N to 0.5N (Minimum value is typical.)

*Speed of Peeling off:300mm/min

8-3.Taping Condition

(1)Standard quantity per reel

Quantity per 180mm reel : 15000 pcs. / reel

(2)There shall be leader-tape(cover tape only and empty tape ) and trailer- tape(empty tape) as follows.

(3)Marking for reel

The following items shall be marked on a label and the label is stuck on the reel.

(Customer part number, MURATA part number, Inspection number(∗1), RoHS marking(∗2), Quantity, etc)

∗1) « Expression of Inspection No. » □□

OOOO ×××

(1) (2) (3)

(1)

Factory Code

(2) Date First digit : Year / Last digit of year

Second digit : Month / Jan. to Sep. → 1 to 9, Oct. to Dec. → O, N, D

Third, Fourth digit : Day

(3) Serial No.

∗2) « Expression of RoHS marking » ROHS – Y (△)

(1) (2)

(1)

RoHS regulation conformity parts.

(2) MURATA classification number

(4)Outside package

These reels shall be packed in the corrugated cardboard package and the following items shall be marked

on a label and the label is stuck on the box.

(Customer name, Purchasing order number, Customer part number, MURATA part number,

RoHS marking (∗2), Quantity, etc)

165 to 180 degree

Cover tape

Plastic tape

P1-P3 P4-P6 P7-P7

NFZ03SG501SN10D

Mfr. #:

Buy NFZ03SG501SN10D

Manufacturer:

Murata Electronics

Description:

Ferrite Beads 0201 500ohm@900MHz 275mA DCR 0.56ohm

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

NFZ03SG501SN10D

NFZ03SG501SN10D

Products related to this Datasheet