EVAL-AD5040SDZ/EVAL-AD5060SDZ to EVAL-AD5062SDZ User Guide UG-923
Rev. 0 | Page 8 of 13
HOW TO USE THE SOFTWARE
STARTING THE SOFTWARE
To run the software, take the following steps:
1. Connect the evaluation board to the SDP-B board and
connect the USB cable between the SDP-B board and
the PC.
2. Power the SDP-B board and the evaluation board by
connecting 5 V to Connector J2.
3. Click Start > All Programs > Analog Devices > AD506x
Evaluation Software The software will identify the board
connected to the SDP-B and display the board name, as
shown in Figure 3.
Figure 3. Connection Message
If the SDP-B board is not connected to the USB port when the
software is launched, a connectivity error displays (see Figure 4).
Connect the evaluation board to the USB port of the PC, wait a
few seconds, click Rescan, and follow the instructions.
Figure 4. Connectivity Error
When the software connects to the SDP-B and evaluation board,
the main window of the evaluation software opens, as shown in
Figure 5.
Figure 5. AD506x Evaluation Software Main Window