EVERLIGHT ELECTRONICS CO.,LTD.
59-14 UWD/TR8
Everlight Electronics Co., Ltd. http://www.everlight.com Rev. 1.0 Page: 10 of 10
Device No. : Prepared date: 03-Nov-2004 Prepared by: Jeff Tsai
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable,
a double-head soldering iron should be used (as below figure). It should be confirmed beforehand
whether the characteristics of the LEDs will or will not be damaged by repairing.
EVERLIGHT ELECTRONICS CO., LTD. Tel: 886-2-2267-2000, 2267-9936
Office: No 25, Lane 76, Sec 3, Chung Yang Rd, Fax: 886-2267-6244, 2267-6189, 2267-6306
Tucheng, Taipei 236, Taiwan, R.O.C http://www.everlight.com