MK2771-16
VCXO AND SET-TOP CLOCK SOURCE VCXO AND SYNTHESIZER
IDT™
VCXO AND SET-TOP CLOCK SOURCE 4
MK2771-16 REV G 051310
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the MK2771-16. These ratings, which are
standard values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these
or any other conditions above those indicated in the operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical
parameters are guaranteed only over the recommended operating temperature range.
DC Electrical Characteristics
Unless stated otherwise, VDD = 5 V ±5%, Ambient Temperature 0 to +70° C
Item Rating
Supply Voltage, VDD (referenced to GND) 7 V
Inputs and Clock Outputs (referenced to GND) -0.5 V to VDD+0.5 V
Ambient Operating Temperature 0 to +70° C
Storage Temperature -65 to +150° C
Junction Temperature 125° C
Soldering Temperature 260° C
Parameter Symbol Conditions Min. Typ. Max. Units
Operating Voltage VDD 4.75 5.25 V
Operating Voltage VDDIO All inputs/outputs 3.00 5.25 V
Input High Voltage, X1 pin only V
IH
3.5 2.5 V
Input Low Voltage, X1 pin only V
IL
2.5 1.5 V
Input High Voltage (except
PS1)
V
IH
2V
Input Low Voltage (except
PS1)
V
IL
0.8 V
Input High Voltage (PS1 only) V
IH
VDD-0.5 V
Input Low Voltage (PS1 only) V
IL
0.5 V
Output High Voltage V
OH
I
OH
= -25 mA 2.4 V
Output Low Voltage V
OL
I
OL
= 25 mA – – 0.4 V
Output High Voltage, CMOS
Level
V
OH
I
OH
= -8 mA VDD-0.4 V
Operating Supply Current IDD5 No load, Note 1 42 mA
Operating Supply Current IDDIO No load, VDDIO
= 3.3 V
19 mA
Short Circuit Current I
OS
Each output ±100 mA
Input Capacitance, except X1 C
IN
Except X1, X2 7 pF
Frequency Synthesis Error All clocks 0 ppm
VIN, VCXO Control Voltage 0 3 V