Muilt - 6 Pack, Inductors and Transformers
PM600 / PM610 / PM620 Series
Part
Number
L (uH)
@ 100KHz
DCR (Ω)
Max.
Isat
(A)
Irms
(A)
PM600-01
201.6 ±30%
0.324 0.02 0.46
PM600-02
89.6 ±30%
0.137 0.03 0.71
PM600-03
27.4 ±10%
0.324 0.31 0.46
PM600-04
12.2 ±10%
0.137 0.47 0.71
PM600-05
14.7 ±10%
0.324 0.58 0.46
PM600-06
6.5 ±10%
0.137 0.87 0.71
PM600-07
10.9 ±10%
0.324 0.88 0.46
PM600-08
4.9 ±10%
0.137 1.32 0.71
PM600-09
8.5 ±10%
0.324 1.23 0.46
PM600-10
3.8 ±10%
0.137 1.85 0.71
PM610-01
160.0 ±30%
0.202 0.04 0.68
PM610-02
78.4 ±30%
0.094 0.06 1.00
PM610-03
21.6 ±10%
0.202 0.67 0.68
PM610-04
10.6 ±10%
0.094 0.96 1.00
PM610-05
11.6 ±10%
0.202 1.30 0.68
PM610-06
5.7 ±10%
0.094 1.86 1.00
PM610-07
8.3 ±10%
0.202 2.00 0.68
PM610-08
4.1 ±10%
0.094 2.86 1.00
PM610-09
6.6 ±10%
0.202 2.30 0.68
PM610-10
3.2 ±10%
0.094 3.29 1.00
PM620-01
160.6 ±30%
0.094 0.03 1.28
PM620-02
77.0 ±30%
0.065 0.04 1.54
PM620-03
131.8 ±20%
0.094 0.08 1.28
PM620-04
63.2 ±20%
0.065 0.12 1.54
PM620-05
23.3 ±10%
0.094 0.36 1.28
PM620-06
11.2 ±10%
0.065 0.52 1.54
PM620-07
14.2 ±10%
0.094 0.76 1.28
PM620-08
6.8 ±10%
0.065 1.10 1.54
PM620-09
9.3 ±10%
0.094 1.11 1.28
PM620-10
4.5 ±10%
0.065 1.60 1.54
PM620-11
7.9 ±10%
0.094 1.40 1.28
PM620-12
3.8 ±10%
0.065 2.02 1.54
Special Features:
• Six windings offer many inductor or transformer
configuration
• High magnetic coupling
• Non-gapped and gapped core construction
• Low core loss at high frequency applications
• Low noise radiation
• Compact size and low profile
• Dielectric strength: 500 Vrms between windings
• Operating temperature: -40 to +105 ºC
• Tape & Reel packaging:
PM600, 600/reel
PM610, 300/reel
PM620, 200/reel
Typical Applications:
• Inductors: buck, boost, buck-boost, coupled, input,
output, choke, filter, resonant, high-Q, EMI/RFI
filtering, differential, forward, common mode
• Transformers: flyback, forward, push-pull, bridge,
multiple outputs, inverter, step-up, step-down, gate
drive, base drive, signal, wide band, pulse,
impedance, isolation, converter
Notes:
1. Saturation current is rated to each winding that
causes inductance to drop 30% from its initial value.
2. Rms current is rated to each winding that causes
40°C temperature rise.
3. PM600-01, -02, PM610-01, -02
PM620-01, -02 are non gap core.
.W.Mille
M A G N E T I C S
306 E. Alondra Blvd., Gardena, CA 90247-1059 • (310) 515-1720 • FAX (310) 515-1962
w w w . j w m i l l e r . c o m