Accessories
Front Panels and DIN-Racks
BCD.00495 Rev AC, 02-Jun-2016 Page 1 of 5
MELCHER
The Power Partners.
Front Panels
Description
Front panels are available for 19" DIN-rack mounting of 3 U
cassette type power supplies in Schroff system version
(Intermas system on request) and may be attached to the
converter by means of countersunk screws.
An assembly kit, consisting of a front panel and a support
bracket, enables arrangement of two standard cassettes with
up to six output voltages in 6 U configuration.
All front panels are of colorless anodized aluminum and
delivered with one or 2 grey plastic handles of 3 TE for easy
pull-out and 2 or 4 hand-press insertable plastic retainers with
captive screws for fixing to the rack.
Note: Custom specific front panels are available on request.
Dimensions according to DIN 41494-1 (IEC 60297):
Width: 1 TE =5.08 mm (0.2")
Height: 1 U = 44.45 mm (1.75")
Tolerances: ±0.2 mm, unless otherwise specified.
Note: In Europe, often HE instead of U is used.
Schroff System for 3 U Rack
Q-, P- Series Front Panels in 4, 5, or 6 TE
These front panels available in three versions and fit to all
DC-DC converters of the Q, P and HP Series; see fig. 1 for the
mechanical details.
Table 1: Front panel selection for P and Q Series
T E X Case Conv. Panel Designation
mm series type
4 20.0 Q01, Q05 Q, HP G04-Q01 HZZ00835
Q04 P G04-Q04 HZZ00840
5 25.1 Q01, Q05 Q, HP G05-Q01 HZZ00836
Q04 P G05-Q04 HZZ00841
6 30.2 Q01, Q05 Q, HP G06-Q01 HZZ00839
Q04 P G06-Q04 HZZ00842
8 40.3 Q01, Q05 Q, HP G08-Q01 HZZ00846
Q04 P G08-Q04 HZZ00850
Note: For using several units nearby to each other, we advise to
pack them not too densely, in order to assure good thermal
management (see also relevant data sheet).
Delivery contents:
Front panel, grey plastic handle, 3 countersunk screws, set of
2 plastic retainers with captive screws, and assembly
instruction.
Fig. 1
Front panel for Q, P and HP Series converters
2.5
±0.1
128.4
6.4
±0.1
9.2
±0.1
104
±0.1
X
0.2
122.4
413
9.5
50
20.613
12002a
Cut out for P Series only
