OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

IHB4EB330K

P1-P3P4-P6
IHB
www.vishay.com
Vishay Dale
Revision: 26-Mar-14
1
Document Number: 34015
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Filter Inductors, High Current, Radial Leaded
ELECTRICAL SPECIFICATIONS
Inductance: Measured at 1.0 V with zero DC current
Dielectric: 2500 V
RMS
between winding and 0.250"
[6.35 mm] of insulating covering edge (with optional
insulating covering)
Current Rating: Maximum continuous operating current
based on a + 50 °C temperature rise
Operating Temperature: - 55 °C to + 130 °C (no load),
- 55 °C to + 80 °C (at full rated current)
FEATURES
• Printed circuit mounting
• Wide range of inductance and current ratings
• Pre-tinned leads
• Optional polyolefin tubing and printing available
at additional cost
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
MECHANICAL SPECIFICATIONS
Terminals: Extensions of the winding wire, solder coated to
within 0.063" [1.60 mm] of body
Mounting: Center hole for mechanical mounting, insulated
bushings recommended for center hole mounting
Notes
(1)
E varies between components, see individual model specifications for details, tolerance of ± 0.035
(2)
F varies between components, see individual model specifications for details
DIMENSIONS in inches [millimeters]
MODEL A (MAX.) B (MAX.) D (MIN.)
IHB-1 0.660 [16.76] 0.840 [21.34] 0.115 [2.92]
IHB-2 0.825 [20.96] 0.840 [21.34] 0.115 [2.92]
IHB-3 1.100 [27.94] 0.840 [21.34] 0.115 [2.92]
IHB-4 1.600 [40.64] 1.030 [26.16] 0.175 [4.45]
IHB-5 1.600 [40.64] 1.450 [36.83] 0.175 [4.45]
IHB-6 2.000 [50.80] 1.500 [38.10] 0.240 [6.10]
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
IND. AT 1 kHz
(μH)
TOL.
(%)
DCR MAX.
()
RATED DC CURRENT
(A)
LEAD “E” SPACING
MAXIMUM LEAD “F”
DIAMETER
IHB-1 1.0 ± 20 0.003 14.9 0.450 [11.43] 0.045 [1.15]
IHB-1 1.2 ± 20 0.003 14.9 0.450 [11.43] 0.045 [1.15]
IHB-1 1.5 ± 20 0.004 12.9 0.450 [11.43] 0.045 [1.15]
IHB-1 1.8 ± 20 0.004 12.9 0.450 [11.43] 0.045 [1.15]
IHB-1 2.2 ± 20 0.005 11.6 0.450 [11.43] 0.045 [1.15]
IHB-1 2.7 ± 20 0.005 11.6 0.450 [11.43] 0.045 [1.15]
IHB-1 3.3 ± 20 0.005 11.6 0.450 [11.43] 0.045 [1.15]
IHB-1 3.9 ± 20 0.006 10.6 0.450 [11.43] 0.045 [1.15]
IHB-1 4.7 ± 20 0.007 9.8 0.450 [11.43] 0.045 [1.15]
IHB-1 5.6 ± 20 0.007 9.8 0.450 [11.43] 0.045 [1.15]
IHB-1 6.8 ± 20 0.008 9.2 0.450 [11.43] 0.045 [1.15]
IHB-1 8.2 ± 20 0.009 8.6 0.450 [11.43] 0.045 [1.15]
IHB-1 10 ± 10 0.010 8.2 0.450 [11.43] 0.045 [1.15]
IHB-1 12 ± 10 0.011 7.8 0.450 [11.43] 0.045 [1.15]
IHB-1 15 ± 10 0.015 6.7 0.450 [11.43] 0.040 [1.02]
IHB-1 18 ± 10 0.016 6.5 0.450 [11.43] 0.040 [1.02]
IHB-1 22 ± 10 0.020 5.8 0.450 [11.43] 0.040 [1.02]
IHB-1 27 ± 10 0.030 4.7 0.450 [11.43] 0.032 [0.812]
IHB-1 33 ± 10 0.040 4.1 0.475 [12.07] 0.028 [0.723]
IHB-1 39 ± 10 0.046 3.8 0.475 [12.07] 0.028 [0.723]
F
(2)
D Dia.
A Dia.
E
(1)
B
0.500 ± 0.062
[12.70 ± 1.57]
IHB
www.vishay.com
Vishay Dale
Revision: 26-Mar-14
2
Document Number: 34015
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IHB-1 47 ± 10 0.062 3.3 0.470 [11.94] 0.025 [0.644]
IHB-1 56 ± 10 0.069 3.1 0.470 [11.94] 0.025 [0.644]
IHB-1 68 ± 10 0.077 2.9 0.500 [12.70] 0.025 [0.644]
IHB-1 82 ± 10 0.083 2.8 0.500 [12.70] 0.025 [0.644]
IHB-1 100 ± 10 0.095 2.7 0.500 [12.70] 0.025 [0.644]
IHB-1 120 ± 10 0.127 2.3 0.500 [12.70] 0.023 [0.573]
IHB-1 150 ± 10 0.181 1.9 0.500 [12.70] 0.020 [0.510]
IHB-1 180 ± 10 0.217 1.8 0.500 [12.70] 0.020 [0.510]
IHB-1 220 ± 10 0.240 1.7 0.500 [12.70] 0.020 [0.510]
IHB-1 270 ± 10 0.300 1.5 0.480 [12.19] 0.018 [0.455]
IHB-1 330 ± 10 0.336 1.4 0.480 [12.19] 0.018 [0.455]
IHB-1 390 ± 10 0.460 1.2 0.480 [12.19] 0.016 [0.405]
IHB-1 470 ± 10 0.636 1.0 0.475 [12.07] 0.014 [0.361]
IHB-1 560 ± 10 0.696 1.0 0.475 [12.07] 0.014 [0.361]
IHB-2 1.0 ± 20 0.003 17.4 0.620 [15.75] 0.051 [1.29]
IHB-2 1.2 ± 20 0.003 17.4 0.620 [15.75] 0.051 [1.29]
IHB-2 1.5 ± 20 0.003 17.4 0.620 [15.75] 0.051 [1.29]
IHB-2 1.8 ± 20 0.003 17.4 0.620 [15.75] 0.051 [1.29]
IHB-2 2.2 ± 20 0.004 15.1 0.620 [15.75] 0.051 [1.29]
IHB-2 2.7 ± 20 0.005 13.5 0.620 [15.75] 0.051 [1.29]
IHB-2 3.3 ± 20 0.005 13.5 0.620 [15.75] 0.051 [1.29]
IHB-2 3.9 ± 20 0.005 13.5 0.620 [15.75] 0.051 [1.29]
IHB-2 4.7 ± 20 0.005 13.5 0.620 [15.75] 0.051[1.29]
IHB-2 5.6 ± 20 0.006 12.3 0.620 [15.75] 0.051 [1.29]
IHB-2 6.8 ± 20 0.007 11.4 0.620 [15.75] 0.051 [1.29]
IHB-2 8.2 ± 20 0.007 11.4 0.620 [15.75] 0.051 [1.29]
IHB-2 10 ± 10 0.009 10.0 0.620 [15.75] 0.051 [1.29]
IHB-2 12 ± 10 0.009 10.0 0.620 [15.75] 0.051 [1.29]
IHB-2 15 ± 10 0.013 8.4 0.620 [15.75] 0.045 [1.15]
IHB-2 18 ± 10 0.018 7.1 0.615 [15.62] 0.040 [1.02]
IHB-2 22 ± 10 0.019 6.9 0.615 [15.62] 0.040 [1.02]
IHB-2 27 ± 10 0.026 5.9 0.575 [14.61] 0.036 [0.912]
IHB-2 33 ± 10 0.029 5.6 0.575 [14.61] 0.036 [0.912]
IHB-2 39 ± 10 0.030 5.5 0.600 [15.24] 0.036 [0.912]
IHB-2 47 ± 10 0.035 5.1 0.600 [15.24] 0.036 [0.912]
IHB-2 56 ± 10 0.039 4.8 0.600 [15.24] 0.036 [0.912]
IHB-2 68 ± 10 0.053 4.1 0.600 [15.24] 0.032 [0.812]
IHB-2 82 ± 10 0.060 3.9 0.600 [15.24] 0.032 [0.812]
IHB-2 100 ± 10 0.080 3.4 0.600 [15.24] 0.028 [0.723]
IHB-2 120 ± 10 0.090 3.2 0.600 [15.24] 0.028 [0.723]
IHB-2 150 ± 10 0.098 3.0 0.600 [15.24] 0.028 [0.723]
IHB-2 180 ± 10 0.110 2.9 0.600 [15.24] 0.028 [0.723]
IHB-2 220 ± 10 0.150 2.5 0.600 [15.24] 0.025 [0.644]
IHB-2 270 ± 10 0.213 2.1 0.600 [15.24] 0.023 [0.573]
IHB-2 330 ± 10 0.305 1.7 0.600 [15.24] 0.020 [0.510]
IHB-2 390 ± 10 0.320 1.7 0.600 [15.24] 0.020 [0.510]
IHB-2 470 ± 10 0.355 1.6 0.590 [14.99] 0.020 [0.510]
IHB-2 560 ± 10 0.388 1.5 0.590 [14.99] 0.020 [0.510]
IHB-2 680 ± 10 0.430 1.5 0.590 [14.99] 0.020 [0.510]
IHB-2 820 ± 10 0.590 1.2 0.590 [14.99] 0.018 [0.455]
IHB-2 1000 ± 10 0.818 1.1 0.590 [14.99] 0.016 [0.405]
IHB-2 1200 ± 10 1.140 0.9 0.590 [14.99] 0.014 [0.361]
IHB-2 1500 ± 10 1.260 0.8 0.590 [14.99] 0.014 [0.361]
IHB-2 1800 ± 10 1.390 0.8 0.590 [14.99] 0.014 [0.361]
IHB-2 2200 ± 10 1.540 0.8 0.590 [14.99] 0.014 [0.361]
IHB-3 1.0 ± 20 0.003 20.3 0.790 [20.07] 0.072 [1.83]
IHB-3 1.2 ± 20 0.003 20.3 0.790 [20.07] 0.072 [1.83]
IHB-3 1.5 ± 20 0.003 20.3 0.790 [20.07] 0.072 [1.83]
IHB-3 1.8 ± 20 0.003 20.3 0.790 [20.07] 0.072 [1.83]
IHB-3 2.2 ± 20 0.003 20.3 0.790 [20.07] 0.072 [1.83]
IHB-3 2.7 ± 20 0.003 20.3 0.790 [20.07] 0.072 [1.83]
IHB-3 3.3 ± 20 0.003 20.3 0.790 [20.07] 0.072 [1.83]
IHB-3 3.9 ± 20 0.003 20.3 0.790 [20.07] 0.072 [1.83]
IHB-3 4.7 ± 20 0.003 20.3 0.790 [20.07] 0.072 [1.83]
IHB-3 5.6 ± 20 0.003 20.3 0.790 [20.07] 0.072 [1.83]
IHB-3 6.8 ± 20 0.004 17.6 0.790 [20.07] 0.072 [1.83]
IHB-3 8.2 ± 20 0.004 17.6 0.790 [20.07] 0.072 [1.83]
IHB-3 10 ± 10 0.006 14.4 0.770 [19.56] 0.064 [1.63]
IHB-3 12 ± 10 0.008 12.4 0.750 [19.05] 0.057 [1.45]
IHB-3 15 ± 10 0.009 11.7 0.750 [19.05] 0.057 [1.45]
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
IND. AT 1 kHz
(μH)
TOL.
(%)
DCR MAX.
()
RATED DC CURRENT
(A)
LEAD “E” SPACING
MAXIMUM LEAD “F”
DIAMETER
IHB
www.vishay.com
Vishay Dale
Revision: 26-Mar-14
3
Document Number: 34015
For technical questions, contact: magnetics@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IHB-3 18 ± 10 0.010 11.1 0.750 [19.05] 0.057 [1.45]
IHB-3 22 ± 10 0.011 10.6 0.750 [19.05] 0.057 [1.45]
IHB-3 27 ± 10 0.012 10.2 0.800 [20.32] 0.057 [1.45]
IHB-3 33 ± 10 0.017 8.5 0.780 [19.81] 0.051 [1.29]
IHB-3 39 ± 10 0.022 7.5 0.780 [19.81] 0.051 [1.29]
IHB-3 47 ± 10 0.024 7.2 0.760 [19.30] 0.045 [1.15]
IHB-3 56 ± 10 0.026 6.9 0.760 [19.30] 0.045 [1.15]
IHB-3 68 ± 10 0.029 6.5 0.760 [19.30] 0.045 [1.15]
IHB-3 82 ± 10 0.032 6.2 0.760 [19.30] 0.045 [1.150]
IHB-3 100 ± 10 0.034 6.0 0.760 [19.30] 0.045 [1.150]
IHB-3 120 ± 10 0.046 5.2 0.740 [18.80] 0.040 [1.020]
IHB-3 150 ± 10 0.064 4.4 0.720 [18.29] 0.036 [0.912]
IHB-3 180 ± 10 0.072 4.1 0.720 [18.29] 0.036 [0.912]
IHB-3 220 ± 10 0.080 3.9 0.790 [20.07] 0.036 [0.912]
IHB-3 270 ± 10 0.110 3.4 0.770 [19.56] 0.032 [0.812]
IHB-3 330 ± 10 0.122 3.2 0.770 [19.56] 0.032 [0.812]
IHB-3 390 ± 10 0.169 2.7 0.740 [18.80] 0.028 [0.723]
IHB-3 470 ± 10 0.187 2.6 0.740 [18.80] 0.028 [0.723]
IHB-3 560 ± 10 0.205 2.5 0.740 [18.80] 0.028 [0.723]
IHB-3 680 ± 10 0.256 2.2 0.725 [18.42] 0.025 [0.644]
IHB-3 820 ± 10 0.288 2.1 0.725 [18.42] 0.025 [0.644]
IHB-3 1000 ± 10 0.426 1.7 0.715 [18.16] 0.023 [0.573]
IHB-3 1200 ± 10 0.462 1.6 0.760 [19.30] 0.023 [0.573]
IHB-3 1500 ± 10 0.518 1.5 0.760 [19.30] 0.023 [0.573]
IHB-3 1800 ± 10 0.705 1.3 0.740 [18.80] 0.020 [0.510]
IHB-3 2200 ± 10 1.020 1.1 0.720 [18.29] 0.018 [0.455]
IHB-3 2700 ± 10 1.140 1.0 0.720 [18.29] 0.018 [0.455]
IHB-3 3300 ± 10 1.270 1.0 0.720 [18.29] 0.018 [0.455]
IHB-3 3900 ± 10 1.670 0.9 0.700 [17.78] 0.016 [0.405]
IHB-3 4700 ± 10 1.860 0.8 0.730 [18.54] 0.016 [0.405]
IHB-4 1.8 ± 20 0.002 33.8 1.10 [27.94] 0.072 [1.83]
IHB-4 2.2 ± 20 0.002 33.8 1.10 [27.94] 0.072 [1.83]
IHB-4 2.7 ± 20 0.003 27.6 1.10 [27.94] 0.072 [1.83]
IHB-4 3.3 ± 20 0.003 27.6 1.10 [27.94] 0.072 [1.83]
IHB-4 3.9 ± 20 0.003 27.6 1.10 [27.94] 0.072 [1.83]
IHB-4 4.7 ± 20 0.003 27.6 1.10 [27.94] 0.072 [1.83]
IHB-4 5.6 ± 20 0.004 23.9 1.10 [27.94] 0.072 [1.83]
IHB-4 6.8 ± 20 0.004 23.9 1.10 [27.94] 0.072 [1.83]
IHB-4 8.2 ± 20 0.004 23.9 1.10 [27.94] 0.072 [1.83]
IHB-4 10 ± 10 0.005 21.4 1.10 [27.94] 0.072 [1.83]
IHB-4 12 ± 10 0.005 21.4 1.10 [27.94] 0.072 [1.83]
IHB-4 15 ± 10 0.006 19.5 1.10 [27.94] 0.072 [1.83]
IHB-4 18 ± 10 0.008 16.9 1.10 [27.94] 0.064 [1.63]
IHB-4 22 ± 10 0.009 15.9 1.10 [27.94] 0.064 [1.63]
IHB-4 27 ± 10 0.010 15.1 1.10 [27.94] 0.064 [1.63]
IHB-4 33 ± 10 0.011 14.4 1.10 [27.94] 0.064 [1.63]
IHB-4 39 ± 10 0.012 13.8 1.10 [27.94] 0.064 [1.63]
IHB-4 47 ± 10 0.018 11.3 1.10 [27.94] 0.057 [1.45]
IHB-4 56 ± 10 0.019 11.0 1.11 [28.19] 0.057 [1.45]
IHB-4 68 ± 10 0.021 10.4 1.11 [28.19] 0.057 [1.45]
IHB-4 82 ± 10 0.023 10.0 1.11 [28.19] 0.057 [1.45]
IHB-4 100 ± 10 0.025 9.6 1.11 [28.19] 0.057 [1.45]
IHB-4 120 ± 10 0.028 9.0 1.11 [28.19] 0.057 [1.45]
IHB-4 150 ± 10 0.040 7.6 1.10 [27.94] 0.051 [1.29]
IHB-4 180 ± 10 0.045 7.1 1.10 [27.94] 0.051 [1.29]
IHB-4 220 ± 10 0.050 6.8 1.10 [27.94] 0.051 [1.29]
IHB-4 270 ± 10 0.056 6.4 1.10 [27.94] 0.051 [1.29]
IHB-4 330 ± 10 0.074 5.6 1.16 [29.46] 0.045 [1.15]
IHB-4 390 ± 10 0.082 5.3 1.13 [28.70] 0.045 [1.15]
IHB-4 470 ± 10 0.114 4.5 1.13 [28.70] 0.040 [1.02]
IHB-4 560 ± 10 0.125 4.3 1.13 [28.70] 0.040 [1.02]
IHB-4 680 ± 10 0.139 4.1 1.13 [28.70] 0.040 [1.02]
IHB-4 820 ± 10 0.154 3.9 1.13 [28.70] 0.040 [1.02]
IHB-4 1000 ± 10 0.216 3.3 1.10 [27.94] 0.036 [0.912]
IHB-4 1200 ± 10 0.232 3.1 1.10 [27.94] 0.036 [0.912]
IHB-4 1500 ± 10 0.324 2.7 1.14 [28.96] 0.032 [0.812]
IHB-4 1800 ± 10 0.360 2.5 1.14 [28.96] 0.032 [0.812]
IHB-4 2200 ± 10 0.494 2.2 1.11 [28.19] 0.028 [0.723]
IHB-4 2700 ± 10 0.555 2.0 1.11 [28.19] 0.028 [0.723]
IHB-4 3300 ± 10 0.773 1.7 1.09 [27.69] 0.025 [0.644]
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
IND. AT 1 kHz
(μH)
TOL.
(%)
DCR MAX.
()
RATED DC CURRENT
(A)
LEAD “E” SPACING
MAXIMUM LEAD “F”
DIAMETER
P1-P3P4-P6

IHB4EB330K

Mfr. #:
Buy IHB4EB330K
Manufacturer:
Vishay / Dale
Description:
Fixed Inductors IHB-4 33 10% EB E2
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet