SpecNo. JELF243A – 9130-01 P3/8
MURATA MFG.CO., LTD
Reference
Only
8. AEC-Q200 Requirement
8.1 Performance (based on Table 5 for Magnetics(Inductors / Transformer)
AEC-Q200 Rev.D issued June. 1 2010
AEC-Q200 Murata Specification / Deviation
No Stress Test Method
3 High
Temperature
Exposure
1000hours at 125 deg C
Set for 24hours at room
temperature, then measured.
Meet Table A after testing.
Table A
4 Temperature
Cycling
1000cycles
-40 deg C to + 105deg C
Set for 24hours at room
temperature,then measured.
Meet Table A after testing.
7 Biased Humidity 1000hours at 85 deg C, 85%R
unpowered.
Meet Table A after testing.
8 Operational Life
pply Rated Current 85 deg C
1000 hours
Set for 24hours at room
temperature, then measured
Meet Table A after testing.
9 External Visual
isual inspection No abnormalities
10 Physical Dimension Meet ITEM 5
(Style and Dimensions)
No defects
12 Resistance
o Solvents
Per
MIL-STD-202
Method 215
Not Applicable
13 Mechanical Shock Per MIL-STD-202
Method 213
Condition C
100g’s/6ms/Half sine
Meet Table A after testing.
14
ibration 5g's for 20 minutes,
12cycles eah of 3 orientations
est from 10-2000Hz.
Meet Table A after testing.
15 Resistance
o Soldering Hea
No-heating
Solder temperature
260C+/-5 deg C
Immersion time 10s
Pre-heating: 150 to 180C /90±30s
Meet Table B after testing.
Table B
17 ESD
Per AEC-Q200-002 ESD Rank: Refer to Item 3. Rating
No defects
18 Solderbility Per J-STD-002 Method b : Not Applicable
95% of the terminations is to be soldered.
(Except exposed wire)
19 Electrical
Characterization
Measured : Inductance No defects
20 Flammability Per UL-94 Not Applicable
Appearance No damage
Inductance
(at 1MHz)
Within ±10%
DC
Resistance
Change
Within ±10%
Appearance No damage
Inductance
(at 1MHz)
Within ±20%
DC
Resistance
Change
Within ±10%