6024 Silver Creek Valley Road
San Jose, California 95138
Sales
800-345-7015 (inside USA)
+1 408-284-8200 (outside USA)
Technical Support
MEMS_Support@idt.com
www.idt.com/go/MEMS
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at I
DT’s sole discretion. All information in this document, including
descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the
independent state and are not guaranteed to perform
the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, t
he suitability of IDT’s products for any
particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intelle
ctual property rights of IDT or any
third parties. IDT’s products are not intended for use in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety
of users. Anyone using an IDT
product in such a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners.
Copyright 2010, 2011, 2012. All rights reserved.
Dec 09, 2012
www.IDT.com
©2013 Integrated Device Technology, Inc
156.25 MHz LVPECL MEMS Oscillator
4MA156250Z3 Datasheet
Pin Description Solder Reflow Profile
Pin # Name Description
1 OE Output Enable*
2 NC No Connect
3 GND Ground
4 OUT+ Output
5 OUT– Complementary Output
6 VDD Power Supply Voltage
* Pulled high internally
Package Outline and Dimensions Typical PCB Land Pattern
Temperature (°C)
217°C
150°C
60-150
sec
40 sec (max)
245°C
(260°C max)
60-180
sec
3
°
C
/
s
e
c
m
a
x
6
°
C
/
s
e
c
m
a
x
50
100
150
200
250
Time
Temperature (°C)
217°C
150°C
60-150
sec
40 sec (max)
245°C
(260°C max)
60-180
sec
3
°
C
/
s
e
c
m
a
x
6
°
C
/
s
e
c
m
a
x
50
100
150
200
250
50
100
150
200
250
Time
1.27 Bsc
1.00 ±0.05
Pin #1 ID
Chamfer
0.30 x 45°
0.64 ±0.05
0.30 Ref
1.27 Bsc
1.00 ±0.05
Pin #1 ID
Chamfer
0.30 x 45°
0.64 ±0.05
1.27 Bsc
1.00 ±0.05
Pin #1 ID
Chamfer
0.30 x 45°
0.64 ±0.05
0.30 Ref0.30 Ref
7.00 ±0.05
5.0 ±0.05
6L SMD
7.0 x 5.0mm
7.00 ±0.05
5.0 ±0.05
6L SMD
7.0 x 5.0mm
0.85 ±0.05
0.0-0.05
0.203 Ref.
0.85 ±0.05
0.0-0.05
0.203 Ref.
0.85 ±0.05
0.0-0.05
0.203 Ref.
0.85 ±0.05
0.0-0.05
0.203 Ref.
6L SMD
5.0 x 3.2mm
5.00 ±0.05
6L SMD
5.0 x 3.2mm
5.00 ±0.05
2.54
2.60
1.50
0.90
OE
GND
VDD
OUT+
NC
OUT-
2.54
2.60
1.50
0.90
OE
GND
VDD
OUT+
NC
OUT-
5.08
3.60
OE
GND
VDD
OUT+
NC OUT-
1.60
1.60
5.08
3.60
OE
GND
VDD
OUT+
NC OUT-
1.60
1.60
2.54 Bsc
1.30 ±0.05
Pin #1 ID
Chamfer
0.30 x 45°
1.50 ±0.05
1.00 Ref
2.54 Bsc
1.30 ±0.05
Pin #1 ID
Chamfer
0.30 x 45°
1.50 ±0.05
1.00 Ref
