OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

MS563702BA03-50

P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18
MS5637-02BA03
Low Voltage Barometric Pressure Sensor
SENSOR SOLUTIONS /// MS5637-02BA03
09/2015
Page 16
MOUNTING AND ASSEMBLY CONSIDERATIONS
SOLDERING
Please refer to the application note AN808 available on our website for all soldering issues.
MOUNTING
The MS5637 can be placed with automatic Pick & Place equipment using vacuum nozzles. It will not be damaged
by the vacuum. Due to the low stress assembly the sensor does not show pressure hysteresis effects. It is important
to solder all contact pads.
CONNECTION TO PCB
The package outline of the module allows the use of a flexible PCB for interconnection. This can be important for
applications in watches and other special devices.
CLEANING
The MS5637 has been manufactured under clean-room conditions. It is therefore recommended to assemble the
sensor under class 10’000 or better conditions. Should this not be possible, it is recommended to protect the sensor
opening during assembly from entering particles and dust. To avoid cleaning of the PCB, solder paste of type “no-
clean” shall be used. Cleaning might damage the sensor!
ESD PRECAUTIONS
The electrical contact pads are protected against ESD up to 2 kV HBM (human body model). It is therefore essential
to ground machines and personnel properly during assembly and handling of the device.
The MS5637 is shipped in antistatic transport boxes. Any test adapters or production transport boxes used during
the assembly of the sensor shall be of an equivalent antistatic material.
DECOUPLING CAPACITOR
Particular care must be taken when connecting the device to the power supply. A 100nF minimum ceramic capacitor
must be placed as close as possible to the MS5637 VDD pin. This capacitor will stabilize the power supply during
data conversion and thus, provide the highest possible accuracy.
MS5637-02BA03
Low Voltage Barometric Pressure Sensor
SENSOR SOLUTIONS /// MS5637-02BA03
09/2015
Page 17
TYPICAL PERFORMANCE CHARACTERISTICS
PRESSURE AND TEMPERATURE ERROR VERSUS PRESSURE AND TEMPERATURE
(TYPICAL VALUES)
PRESSURE AND TEMPERATURE ERROR VERSUS POWER SUPPLY
(TYPICAL VALUES)
MS5637-02BA03
Low Voltage Barometric Pressure Sensor
SENSOR SOLUTIONS /// MS5637-02BA03
09/2015
Page 18
ORDERING INFORMATION
Part Number / Art. Number
Product
Delivery Form
MS563702BA03-50
Micro Altimeter Module 3x3mm
Tape & Reel
TE.com/sensorsolutions
Measurement Specialties, Inc., a TE Connectivity company.
Measurement Specialties, TE Connectivity, TE Connectivity (logo) and EVERY CONNECTION COUNTS are trademarks. All other logos, products and/or company names referred to herein
might be trademarks of their respective owners.
The information given herein, including drawings, illustrations and schematics which are intended for illustration purposes only, is believed to be reliable. However, TE Connectivity makes
no warranties as to its accuracy or completeness and disclaims any liability in connection with its use. TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard
Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse
of the product. Users of TE Connectivity products should make their own evaluation to determine the suitability of each such product for the specific application.
© 2015 TE Connectivity Ltd. family of companies All Rights Reserved.
DA5637-02BA03_007
000056372111 ECN2317
NORTH AMERICA
Measurement Specialties, Inc.,
a TE Connectivity Company
45738 Northport Loop West
Fremont, CA 94538
Tel: +1 800 767 1888
Fax: +1 510 498 1578
e-mail: pfg.cs.amer@meas-spec.com
Website: www.meas-spec.com
EUROPE
Measurement Specialties (Europe), Ltd.,
a TE Connectivity Company
Switzerland Sàrl
Ch. Chapons-des-Prés 11
CH-2022 Bevaix
Tel: +41 32 847 9550
Fax: + 41 32 847 9569
e-mail: sales.ch@meas-spec.com
Website: www.meas-spec.com
ASIA
Measurement Specialties (China), Ltd.,
a TE Connectivity Company
No. 26 Langshan Road
Shenzhen High-Tech Park (North) Nanshan
District, Shenzhen, 518057
China
Tel: +86 755 3330 5088
Fax: +86 755 3330 5099
e-mail: pfg.cs.asia@meas-spec.com
Website: www.meas-spec.com
P1-P3P4-P6P7-P9P10-P12P13-P15P16-P18

MS563702BA03-50

Mfr. #:
Buy MS563702BA03-50
Manufacturer:
TE Connectivity / Measurement Specialties
Description:
Board Mount Pressure Sensors Low Volt Barometric Pressure Sensor
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet