TSOP753..W, TSOP755..W
www.vishay.com
Vishay Semiconductors
Rev. 1.5, 22-Jul-16
1
Document Number: 82497
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
IR Receiver Modules for Remote Control Systems
MECHANICAL DATA
Pinning:
1, 4 = GND, 2 = V
S
, 3 = OUT
ORDERING CODE
Taping:
TSOP75...WTT - top view taped
TSOP75...WTR - side view taped
FEATURES
• Very low supply current
• Photo detector and preamplifier in one package
• Compatible also with short burst dataformats
• Supply voltage: 2.5 V to 5.5 V
• Improved immunity against ambient light
• Capable of side or top view
• Low profile 2.35 mm
• Insensitive to supply voltage ripple and noise
• Material categorization: for definitions of
compliance please see
www.vishay.com/doc?99912
DESCRIPTION
The TSOP753..W, TSOP755..W series are a miniaturized
receiver module for infrared remote control systems. Two
PIN diodes and a preamplifier are assembled on a
leadframe, the epoxy package contains an IR filter.
The TSOP753..W..series is optimized to suppress almost all
spurious pulses from energy saving lamps like CFLs. AGC3
may also suppress some data signals if continuously
transmitted.
The TSOP755..W series contain a very robust AGC5. This
series should only be used for critically noisy environments.
This component has not been qualified according to
automotive specifications.
PARTS TABLE
AGC
NOISY ENVIRONMENTS
AND SHORT BURSTS (AGC3)
VERY NOISY ENVIRONMENTS
AND SHORT BURSTS (AGC5)
Carrier
frequency
30 kHz TSOP75330W TSOP75530W
33 kHz TSOP75333W TSOP75533W
36 kHz TSOP75336W
(1)
TSOP75536W
38 kHz TSOP75338W
(2)(3)(4)(5)
TSOP75538W
40 kHz TSOP75340W TSOP75540W
56 kHz TSOP75356W TSOP75556W
Package Heimdall no lens
Pinning 1, 4 = GND, 2 = V
S
, 3 = OUT
Dimensions (mm) 6.8 W x 3.0 H x 2.35 D
Mounting SMD
Application Remote control
Best remote control code
(1)
MCIR
(2)
Mitsubishi
(3)
RECS-80 Code
(4)
r-map
(5)
XMP-1, XMP-2