GSP1.9201.1 Datasheet GSP1.6201.1, GSP1.9201.1, GSP1.9413.1 | P1-P3

Connectors (Inlets/Outlets)

GSP1

https://www.schurter.com /PG07

Connectors

IEC Appliance Inlet C14 or C18, Screw-on Mounting, Rear Side, PCB terminals

See below:

Approvals and Compliances

C14

70° C

C18

70° C

Description

- Panel Mount , Screw-on mounting from rear-side

- 1 Function :

- Appliance Inlet , Pin temperature 70 °C , protection class I or II

- For PCB mounting

Other versions on request

- Ground terminal with quick-connect terminal 6,3 x 0,8 mm

- With solder terminals

- Variant with notch for V-Lock mating Cordsets

Weblinks

pdf datasheet, html-datasheet, General Product Information, Distributor-

Stock-Check, Accessories, Detailed request for product, Microsite

Newly available variants corresponding to V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset.

The cord latching system prevents against accidental removal of the cordset.

Technical Data

Ratings IEC 10 A / 250 VAC; 50 Hz

Ratings UL/CSA 15 A / 250 VAC; 60 Hz

Dielectric Strength > 3 kVAC between L-N

> 3 kVAC between L/N-PE

(1 min/50 Hz)

Allowable Operation Tempe-

rature

-25 °C to 70 °C

IP-Protection from front side IP 40 acc. to IEC 60529

Insulation cover Suitable for appliances with protection

class I or II acc. to IEC 61140

Terminal For PCB mounting ; Ground terminal:

Quick connect terminals 4.8 x 0.8 mm

angled or straight

Solder terminal on request

Panel Thickness S Screw: max 3 mm

Mounting screw torque max 0.5 Nm

Material: Housing Thermoplastic, black, UL 94V-0

appliance inlet/-outlet C14 / C18 acc. to IEC 60320-1,

UL 60320-1, CSA C22.2 no. 60320-1

(for cold conditions) pin-temperature 70

°C, 10 A, Protection Class I or II

Approvals and Compliances

Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about

Approvals

The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products.

Approval Reference Type: GSP1

Approval Logo Certificates Certification Body Description

VDE Approvals VDE Certificate Number: 40012767

UL Approvals UL UL File Number: E96454

CQC Approvals CQC CCC Certificate Number: 2006010204183838

Connectors (Inlets/Outlets)

GSP1

https://www.schurter.com /PG07

Connectors

Product standards

Product standards that are referenced

Organization Design Standard Description

Designed according to IEC 60320-1 Appliance couplers for household and similar general purposes

Designed according to UL 60320-1 Standard for Attachment Plugs and Receptacles

Designed according to CSA C22.2 no. 60320-1 General Use Receptacles, Attachment Plugs, and Similar Wiring Devices

Application standards

Application standards where the product can be used

Organization Design Standard Description

Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information

technologyequipment.

Compliances

The product complies with following Guide Lines

Identification Details Initiator Description

CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable

requirements laid down in the harmonisation of Community legislation on

its affixing in accordance with EU Regulation 765/2008.

RoHS SCHURTER AG EU Directive RoHS 2011/65/EU

China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March

2007. It is similar to the EU directive RoHS.

REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration,

Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as

"REACH") entered into force.

MicrositeV-Lock SCHURTER AG V-Lock system are based on a matching plug-dose combination. The

connector is equipped with a notch intended for use with the latching

cordset. The cord latching system prevents against accidental removal of

the cordset.

Dimensions [mm]

29.9

49.6

27.8

3.5

15.85

21.9

±0.1

±0.15

±0.5

3.5

24.3

8.7

±0.05

without insulation cover

25.5

with insulation cover

max.R5.9

3.6

22.5

30.3

±0.15

+0.2

ø 3.4

+0.1

±0.05

ø 3.4

+0.1

8.7

±0.1

15.85

Ground terminal

14.25

angled to pin axis

Ground terminal

31.45

straight

Connectors (Inlets/Outlets)

GSP1

https://www.schurter.com /PG07

Connectors

Drilling diagrams

Variants GSP1.9xxx

3.6

7.3

±0.15

1.6

±0.05

±0.1

X deleted for protection class II

Variants GSP1.8xxx

3.6

9.7

±0.15

1.6

9.059.05

±0.1

+0.1

0.2

+0.1

0.2

X deleted for protection class II

All Variants

Protection

Class

PCB terminal

spacing

Mounting flange with Ground terminal 4.8 x 0.8 mm Cover Order Number

I 7/7.3 PCB side through holes, panel side pre-inserted nuts straight

GSP1.9413.1

I 7/7.3 holes for screws M3 angled to pin axis GSP1.9101.1

I 7/7.3 holes for screws M3 straight GSP1.9103.1

█

I 7/7.3 holes for screws M3 straight

GSP1.9113.1

█

I 7/7.3 holes for self-tapping screws 3mm, 4 screws enclosed straight GSP1.9503.1

I 7/7.3 pre-inserted nuts M3, 4 pcs. straight GSP1.9203.1

█

I 7/7.3 pre-inserted nuts M3, 4 pcs. straight GSP1.9203.121

I 9.05/9.7 PCB side through holes, panel side pre-inserted nuts angled to pin axis GSP1.8401.1

I 9.05/9.7 holes for screws M3 angled to pin axis GSP1.8101.1

█

I 9.05/9.7 holes for screws M3 angled to pin axis

GSP1.8111.1

█

I 9.05/9.7 holes for screws M3 straight GSP1.8103.1

I 9.05/9.7 holes for self-tapping screws 3mm, 2 screws enclosed angled to pin axis GSP1.8601.1

I 9.05/9.7 holes for self-tapping screws 3mm, 2 screws enclosed straight

GSP1.8613.1

I 9.05/9.7 holes for self-tapping screws 3mm, 4 screws enclosed angled to pin axis GSP1.8501.1

█

I 9.05/9.7 holes for self-tapping screws 3mm, without screws angled to pin axis GSP1.8701.1

I 9.05/9.7 pre-inserted nuts M3, 4 pcs. angled to pin axis GSP1.8201.1

█

I 9.05/9.7 pre-inserted nuts M3, 4 pcs. angled to pin axis

GSP1.8211.1

I 9.05/9.7 pre-inserted nuts M3, 4 pcs. straight GSP1.8203.1

II 7/7.3 holes for screws M3 - GSP1.9100.1

II 7/7.3 holes for screws M3 -

GSP1.9110.1

II 7/7.3 holes for self-tapping screws 3mm, 4 screws enclosed - GSP1.9500.1

II 7/7.3 pre-inserted nuts M3, 4 pcs. - GSP1.9200.1

II 9.05/9.7 holes for screws M3 - GSP1.8100.1

II 9.05/9.7 holes for screws M3 -

GSP1.8110.1

II 9.05/9.7 holes for self-tapping screws 3mm, 4 screws enclosed - GSP1.8500.1

II 9.05/9.7 pre-inserted nuts M3, 4 pcs. - GSP1.8200.1

█ Most Popular.

Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER

Suffix "21" corresponds to the version with V-Lock mating cordset. The connector is equipped with a notch intended for use with the latching cordset. The cord latching sys-

tem prevents against accidental removal of the cordset.

Packaging unit

50 Pcs

P1-P3 P4-P4

GSP1.9201.1

Mfr. #:

Buy GSP1.9201.1

Manufacturer:

Schurter

Description:

AC Power Entry Modules GSP1 APPLIANCE INLET 10A 70

Lifecycle:

New from this manufacturer.

Delivery:

DHL FedEx Ups TNT EMS

Payment:

T/T Paypal Visa MoneyGram Western Union

GSP1.9201.1

GSP1.9201.1

Products related to this Datasheet