OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

FLHTC0311-22-7-BRL

P1-P2
Users should evaluate the suitability of this product for their application. Specications are subject to change without notice.
Tyco Electronics Corporation also reserves the right to make changes in materials or processing, which do not affect compliance with any specication, without notication to Buyer.
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE
ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
Page 1 of 2
Raychem, TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks.
Raychem Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: 1-800-227-8816
Fax: 1-650-361-6297
DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL.
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
© 2005-2014 Tyco Electronics Corporation. All rights reserved.
SPECIFICATION CONTROL DRAWING
FLHT+0311
HIGH TEMPERATURE HOOKUP WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED, 600 VOLT 7-21-14 Z
The complete requirements for procuring the wire described herein shall consist of this document and the issue in effect of
Raychem Specication WCD 3106, UL Subject 758, Style 3557, File E303150 and carries UL labels to this effect.
TITLE
Date Revision
TABLE I. CONSTRUCTION DETAILS
PART NUMBER
1/
WIRE
SIZE
(AWG)
CONDUCTOR
STRANDING
(number x AWG)
or
(number x SEOD)
(inch) (mm)
NOMINAL
CONDUCTOR
DIAMETER
(inch) (mm)
FINISHED WIRE
MAXIMUM
RESISTANCE
AT 20°C
(ohms/1000 ft.)
(ohms/km)
DIAMETER
(inch) (mm)
NOMINAL
WEIGHT
(lbs/1000 ft.)
(kg/km)
MINIMUM NOMINAL MAXIMUM
FLHTB0311-18-* 18 7 x 26 .047 (1.19) 7.06 (23.2) .0584 (1.48) .0601 (1.53) .0618 (1.57) 5.95 (8.85)
FLHTB0311-16-* 16 7 x 24 .060 (1.52) 4.45 (14.6) .0731 (1.86) .0750 (1.91) .0769 (1.95) 9.75 (14.5)
FLHTB0311-14-* 14 7 x .0242 (.615) .073 (1.85) 2.90 (9.51) .0865 (2.20) .0886 (2.25) .0907 (2.30) 14.6 (21.7)
FLHTC0311-26-* 26 19 x 38 .019 (.483) 45.8 (150.) .0301 (.765) .0315 (.800) .0329 (.836) 1.27 (1.89)
FLHTC0311-24-* 24 19 x 36 .024 (.610) 28.7 (94.2) .0351 (.892) .0365 (.927) .0379 (.963) 1.85 (2.75)
FLHTC0311-22-* 22 19 x 34 .030 (.762) 18.1 (59.4) .0411 (1.04) .0425 (1.08) .0439 (1.12) 2.74 (4.08)
FLHTC0311-20-* 20 19 x 32 .038 (.965) 11.4 (37.4) .0491 (1.25) .0505 (1.28) .0519 (1.32) 4.17 (6.21)
FLHTC0311-18-* 18 19 x 30 .047 (1.19) 7.15 (23.5) .0583 (1.48) .0600 (1.52) .0617 (1.57) 6.34 (9.43)
FLHTC0311-16-* 16 19 x 29 .053 (1.35) 4.82 (15.8) .0656 (1.67) .0675 (1.71) .0694 (1.76) 8.09 (12.0)
FLHTC0311-14-* 14 19 x 27 .066 (1.68) 3.05 (10.0) .0799 (2.03) .0820 (2.08) .0841 (2.14) 12.5 (18.6)
FLHTC0311-12-* 12 19 x 25 .090 (2.29) 1.92 (6.30) .1035 (2.63) .1060 (2.69) .1085 (2.76) 22.4 (33.3)
FLHTD0311-14-* 14 37 x 30 .068 (1.73) 3.22 (10.6) .0819 (2.08) .0840 (2.13) .0861 (2.19) 14.5 (21.6)
FLHTD0311-12-* 12 37 x 28 .085 (2.16) 2.01 (6.59) .0984 (2.50) .1010 (2.57) .1036 (2.63) 19.3 (28.7)
FLHTD0311-10-* 10 37 x 26 .107 (2.72) 1.26 (4.13) .121 (3.07) .125 (3.18) .129 (3.28) 30.7 (45.7)
FLHTE0311-8-* 8 133 x 29 .160 (4.06) .701 (2.30) .175 (4.45) .180 (4.57) .185 (4.70) 54.9 (81.7)
CONDUCTOR - TIN-COATED COPPER
INSULATION - RADIATION-CROSSLINKED,
MODIFIED ETFE
Due to UL limitations on the usage of small strand bare and tin plated conductors, products with conductor strand diameters less than .015 inch (.381 mm) are intended for dry locations only.
For wet locations, other UL recognized products are available.
SPECIFICATION CONTROL DRAWING
2 of 2 Z
FLHT+0311
Page
Revision
SCD
WIRE RATINGS AND ADDITIONAL REQUIREMENTS
TEMPERATURE RATING: 200°C
VOLTAGE RATING: 600 volts (rms) at sea level
CROSSLINK VERIFICATION: 300 ± 3°C for 1 hour
FLAME RATING: VW-1
INSULATION ELONGATION AND TENSILE STRENGTH:
Elongation, 100% (minimum)
Tensile Strength, 5470 lbf/in
2
(minimum)
INSULATION FLAWS:
Spark Test, 6.0 kV (rms)
Impulse Dielectric Test, 8.0 kV (peak)
INSULATION THICKNESS:
AWG 26-16: .0055 inch (.140 mm) (minimum), .006 inch (.152 mm) (minimum average)
AWG 14: .006 inch (.152 mm) (minimum), .0065 inch (.165 mm) (minimum average)
AWG 12: .0065 inch (.165 mm) (minimum), .007 inch (.178 mm) (minimum average)
AWG 10: .007 inch (.178 mm) (minimum), .0075 inch (.191 mm) (minimum average)
AWG 8: .0075 inch (.191 mm) (minimum), .008 inch (.203 mm) (minimum average)
1/ See footer section on page 1
SHRINKAGE: 200°C for 1 hour, 0.125 inch (3.18 mm) (maximum) per end
THERMAL STABILITY: 232°C for 168 hours,
Elongation, 60% (minimum)
Tensile Strength, 5000 lbf/in
2
(minimum)
VOLTAGE WITHSTAND (Post Environmental): 2500 volts (rms), 60 Hz, 5 minutes
SPOOL LABEL: All spool/reel labels containing conductor strand diameters less than
.015 inch (.381 mm) shall include “ For Dry Locations Only “
1/ PART NUMBER:
The “+” in the part number in the upper right hand corner of pages 1 and 2 shall be replaced
with a letter designator to dene conductor stranding (see part numbers in table).
B = 7 Strands C = 19 Strands D = 37 Strands E = Rope Lay
The “*” in the part numbers in Tables I and II shall be replaced by a color code designator.
Example: AWG 18, 19 strands, white: FLHTC0311-18-9
AWG 18, 19 strands, white with a black stripe: FLHTC0311-18-90
TABLE II. PERFORMANCE DETAILS
PART NUMBER
1/
BEND TESTING
MANDREL DIAMETER
(inch) (mm) (± 3%)
WEIGHT
(lb) (kg) (± 3%)
CROSSLINK VERIFICATION CROSSLINK VERIFICATION
FLHTB0311-18-* .500 (12.7) 1.00 (.454)
FLHTB0311-16-* .750 (19.1) 1.50 (.680)
FLHTB0311-14-* 1.00 (25.4) 2.00 (.907)
FLHTC0311-26-* .375 (9.53) .125 (.057)
FLHTC0311-24-* .375 (9.53) .500 (.227)
FLHTC0311-22-* .500 (12.7) .750 (.340)
FLHTC0311-20-* .500 (12.7) 1.00 (.454)
FLHTC0311-18-* .500 (12.7) 1.00 (.454)
FLHTC0311-16-* .750 (19.1) 1.50 (.680)
FLHTC0311-14-* 1.00 (25.4) 2.00 (.907)
FLHTC0311-12-* 1.50 (38.1) 3.00 (1.36)
FLHTD0311-14-* 1.00 (25.4) 2.00 (.907)
FLHTD0311-12-* 1.50 (38.1) 3.00 (1.36)
FLHTD0311-10-* 2.00 (50.8) 3.00 (1.36)
FLHTE0311-8-* 3.00 (76.2) 4.00 (1.81)
P1-P2

FLHTC0311-22-7-BRL

Mfr. #:
Buy FLHTC0311-22-7-BRL
Manufacturer:
TE Connectivity
Description:
Hook-up Wire FLHTC0311-22-7-BRL
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet