Data subject to change without notice.
Miniature Audio Epoxy Potted
106 Series
PC Board Mount
Features
Output power models from 5 to 1,500 milliwatt level available.
P.C. board mount - square pin type (0.025" square typical) - see
mechanical information below for lengths.
Bifilar winding technique used on center tapped units for balanced resistive
and capacitive characteristics.
Rugged black epoxy potted construction produces a completely sealed unit
withstanding severe environmental conditions including those of MIL-T-27
(Grade 5, Class S).
For the more economical open type P.C. mount types please refer to the
148 and 149 series.
Peak working voltage rating of: 200V
Referring to figures 1-9, if connection is not used - no pin will exist.
Part No.
Typical
Nominal Impedance Max. Primary D.C. Resistance Output Insertion Low Frequency
Drawing(Ohms) D.C. ma. (Ohms) +/- 15% Milliwatts Loss Roll Off
Applicaton Primary Secondary (*1) Primary Secondary (*2) db (*3) -1 db (Hz.) (*4) Figure
106C Input 50000 1,500 ct 0 2400 52 10 1 60 7
106E Input 600 ct 600 9 65 83 500 1 150 8
106EE Input 600 ct 600 ct 9 65 83 500 1 150 9
106G Interstage 4000 600 ct 10 340 24 150 1 215 7
106H Interstage 4000 2,600 ct 10 340 100 150 1 215 7
106J Interstage 10000 2,000 ct 6.5 700 89 150 1 215 7
106M Interstage 20000 2,000 ct 4.5 1180 89 150 1 215 7
106Q Output 48 ct 3.2 32 2.4 0.3 1500 1 170 8
106R Output 48 ct 8 32 2.4 0.7 1500 1 170 8
106S Output 100 ct 3.2 22 4.4 0.3 1500 1 170 8
106T Output 100 ct 8 22 4.4 0.7 1500 1 170 8
106V Output 250 ct 8 14 11 0.7 1500 1 170 8
106W Output 500 ct 3.2 10 26 0.3 1500 1 170 8
106X Output 500 ct 8 10 26 0.7 1500 1 170 8
