ISL32613E, ISL32614E
10
Intersil products are manufactured, assembled and tested utilizing ISO9001 quality systems as noted
in the quality certifications found at www.intersil.com/en/support/qualandreliability.html
Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time
without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be
accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third
parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries.
For information regarding Intersil Corporation and its products, see www.intersil.com
FN7906.2
July 27, 2015
For additional products, see www.intersil.com/en/products.html
Submit Document Feedback
About Intersil
Intersil Corporation is a leading provider of innovative power management and precision analog solutions. The company's products
address some of the largest markets within the industrial and infrastructure, mobile computing and high-end consumer markets.
For the most updated datasheet, application notes, related documentation and related parts, please see the respective product
information page found at www.intersil.com
.
You may report errors or suggestions for improving this datasheet by visiting www.intersil.com/ask
.
Reliability reports are also available from our website at www.intersil.com/support
Revision History
The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to web to
make sure you have the latest revision.
DATE REVISION CHANGE
July 27, 2015 FN7906.2 Ordering Information Table on page 2: Removed part numbers ISL32614EMHZ-T and ISL32614EMHZ-T7A.
Recommended Operating Conditions table on page 4: Removed the line referencing “M Suffix”.
Replaced “Product” section with “About Intersil” on page 10.
May 2, 2012 FN7906.1 Page 1, “Features” - changed “Specified for +125°C Operation” to “Specified for +125°C or Full Mil
Temperature Operation”. Also changed Figure 1 title.
Page 2, added new part “ISL32614EMHZ-T” to the “Ordering Information”.
Page 4, changed “Y, Z (V
CC
= 1.8V)” to “Y, Z (V
CC
= 1.8V, Output Enabled)” and added “Y, Z (V
CC
= 1.8V, Output
Disabled)... -8V to +8V” under the “Absolute Maximum Rating”. Also added “(F Suffix)” and “(M Suffix)...-55°C to
+125°C” under the “Recommended Operating Conditions”.
Page 8, replaced Figure 7 and added -55°C curve to Figure 11 under the “Typical Performance Curves”.
August 30, 2011 FN7906.0 Initial Release
