© Semiconductor Components Industries, LLC, 2013
May, 2018 − Rev. 6
1 Publication Order Number:
NCV8535/D
NCV8535
Ultra High Accuracy, Low Iq,
500 mA Low Dropout
Regulator with Enable
The NCV8535 is a high performance, low dropout regulator. With
accuracy of ±0.9% over line and load and ultra−low quiescent current
and noise it encompasses all of the necessary features required by
today’s consumer electronics. This unique device is guaranteed to be
stable without a minimum load current requirement and stable with
any type of capacitor as small as 1.0 mF. The NCV8535 also comes
equipped with sense and noise reduction pins to increase the overall
utility of the device. The NCV8535 offers reverse bias protection.
Features
• High Accuracy Over Line and Load (±0.9% at 25°C)
• Ultra−Low Dropout Voltage at Full Load (260 mV typ.)
• No Minimum Output Current Required for Stability
• Low Noise (31 mVrms w/10 nF C
nr
and 51 mVrms w/out C
nr
)
• Low Shutdown Current (0.07 mA)
• Reverse Bias Protected
• 2.9 V to 12 V Supply Range
• Thermal Shutdown Protection
• Current Limitation
• Requires Only 1.0 mF Output Capacitance for Stability
• Stable with Any Type of Capacitor (including MLCC)
• Available in 1.5 V, 1.8 V, 1.9 V, 2.5 V, 2.8 V, 2.85 V, 3.0 V, 3.3 V,
3.5 V, 5.0 V and Adjustable Output Voltages
• NCV Prefix for Automotive and Other Applications Requiring
Unique Site and Control Change Requirements; AEC−Q100
Qualified and PPAP Capable
• These are Pb−Free Devices
Applications
• PCMCIA Card
• Cellular Phones
• Camcoders and Cameras
• Networking Systems, DSL/Cable Modems
• Cable Set−Top Box
• MP3/CD Players
• DSP Supply
• Displays and Monitors
This document contains information on some products that are still under development.
ON Semiconductor reserves the right to change or discontinue these products without
notice.
See detailed ordering, marking and shipping information in the
package dimensions section on page 21 of this data sheet.
ORDERING INFORMATION
MARKING DIAGRAM
www.onsemi.com
V8535= Specific Device Code
L8535 = Specific Device Code
xxx = ADJ, 150, 180, 190, 250, 280,
285, 300, 330, 350, 500
A = Assembly Location
L = Wafer Lot
Y = Year
W = Work Week
G = Pb−Free Package
DFN10
CASE 485C
V8535
xxx
ALYWG
G
1
Fixed Version
Pin 1, 2. V
out
3. Sense
4. GND
5, 6. NC
7. NR
8. SD
9, 10. V
in
Adj Version
Pin 1, 2. V
out
3. Adj
4. GND
5, 6. NC
7. NR
8. SD
9, 10. V
in
(Note: Microdot may be in either location)
PIN CONFIGURATION
DFNW10
CASE 507AM
L8535
xxx
ALYWG
G
1
