1
Voltage Selector
SWP
www.schurter.com /PG04
Fuses
Voltage selector switch, 6 stages, step switch, panel mounting
Description
- Voltage Selector , 6 stages
- Step switch
- Solder terminals
Standards
- IEC 61058-2-5
- UL 508
- CSA C22.2 no. 14
Technical Data
Ratings IEC: 6.3 A / 250 VAC; 50 Hz
␣ UL: 10 A / 250 VAC; 60 Hz
␣ CSA: 8 A / 250 VAC; 60 Hz
Mounting Panel Mount from front side
Fastening Screw-on mounting
Terminal Solder
Number of Stages 6
Lifetime 300 operating cycles (without load)
Degree of Protection IP 40
Allowable Operation Tempe-
rature
-40 °C to 85 °C
Climatic Category 25/85/21 acc. to IEC 60068-1
Material: Socket Thermoplastic, black, UL 94V-0
Weight 16.5 g
Solderability 350 °C / 2 sec acc. to IEC 60068-2-20,
Test Ta, method 2
Resistance to Soldering Heat 350 °C / 10 sec acc. to IEC 60068-2-20,
Test Tb, method 2
Insulation Resistance > 10'000MΩ (500VDC; 1min)
Contact Resistance < 10 mΩ at 20 mV
Dielectric Strength > 2.5kVAC between L-N
> 4kVAC between L/N-PE
(1min; 50Hz)
Clearance and Creepage Di-
stance
> 5mm
> 8mm between L/N-PE
Resistance to Vibration acc. to IEC 60068-2-6, test Fc
Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in
General Product Information