4Mb
SMART 3 BOOT BLOCK FLASH MEMORY
09005aef8114a789 Micron Technology, Inc., reserves the right to change products or specifications without notice.
F45.fm - Rev. E 6/04 EN
29 ©2003 Micron Technology, Inc. All rights reserved.
®
8000 S. Federal Way, P.O. Box 6, Boise, ID 83707-0006, Tel: 208-368-3900
E-mail: prodmktg@micron.com, Internet: http://www.micron.com, Customer Comment Line: 800-932-4992
Micron, the M logo, and the Micron logo are trademarks of Micron Technology, Inc.
All other trademarks are the property of their respective owners.
Figure 16: 44-Pin Plastic SOP1
(500 mil)
NOTE:
1. Not recommended for new designs.
2. All dimensions in millimeters.
3. Package width and length do not include mold protrusion; allowable mold protrusion is .01” per side.
Data Sheet Designation
Production: This data sheet contains minimum and maximum limits specified over the complete power supply
and temperature range for production devices. Although considered final, these specifications are
subject to change, as further product development and data characterization sometimes occur.
0.40 ±0.08
0.45 (TYP)
+0.05
-0.07
0.15
+0.03
-0.02
(0.10)
16.04 ±0.30
PIN #1 ID
SEE DETAIL A
GAGE
PLANE
0.80
(TYP)
1.72
(TYP)
28.02 ±0.08
0.25
12.60 ±0.08
.076
2.80 MAX
1.27 (TYP)