Ventilation Door Stop Kit
Drip Shield Kit Door Support Guide
Type 1 Louvered Ventilating Plates Temperature Controls
Window Kits Ground Wire Kits
Type 4X Stainless Steel Two Door Wallmount Enclosure
HN4 WM
SS Series
Continuous Hinge Door with Handle
Application
Designed to house electrical, electronic, hydraulic or pneumatic controls
and instruments.
Provides protection where equipment may be hosed down or otherwise be
very wet, or in specific applications where corrosion is a serious problem.
Construction
Formed 12 gauge 304 or 316 stainless steel.
Smooth, continuously welded seams without knockouts, cutouts or holes.
Doors are supported with heavy gauge continuous hinges.
3-pt padlocking door handle.
Seamless poured-in place gasket.
A grounding stud is provided in the enclosure and a bonding stud is
provided on the door.
Center post is removable for easy installation of the inner panel.
Standards
UL 508 Type 3R, 4X, and 12
CSA Type 3R, 4X, and 12
Complies with
NEMA Type 3R, 4X, 12 and 13
IEC 60529, IP66
Finish
Cover and enclosure are natural stainless steel with a smooth brushed
finish.
Removable inner panel is finished in white powder coating.
Accessories
Quality Products. Service Excellence.
