3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Mini D Ribbon (MDR) Cable Assembly
.050″ High Speed Digital Data Transmission System, 26 Position 14526-EZLB-XXX-0SC
Physical
Electrical
Environmental
*RoHS = Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values
in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or polybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing,
this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
Connector Contact Plating
Wiping Area:
30 μ″ [ .76 μm ] Min Gold
Shell Color:
Beige
Shell Material:
Acrylonitrile Butadiene Styrene (ABS)
Cable Color:
Beige
Cable Jacket Material:
Polyvinyl Chloride (PVC)
Cable Flammability:
AWM VW-1
Voltage Rating:
30 V
Current Rating:
1 A
Insulation Resistance:
> 1 × 10
8
Ω
at 100 VDC
Withstanding Voltage:
350 Vrms for 1 minute
Individually Shielded Twisted Pairs
Characteristic Impedance:
100 ± 10
Ω
Conductor Size:
28 AWG Stranded
Propogation Velocity:
1.25 ns/ft [4.1 ns/m ]
Temperature Rating:
-20°C to +75°C
TS-0967-04
Sheet 1 of 3
• Solution for high speed datacom and telecom
applications
• Eight shielded differential pairs plus two
conductors for high bandwidth applications
• Each differential pair has a foil shield and drain
• Entire cable is shielded with a foil and braid for
additional signal protection
• Rugged MDR ribbon type contacts
• Quick release latches
• RoHS* compliant
Date Modified: May 29, 2006
UL File No.: E86982
