PATENT NUMBERS
5713755/5961339
DO NOT
SCALE FROM
THIS PRINT
No OF POSITIONS
-07 THRU -69
(UNSHROUDED)
-15 THRU -69
(SHROUDED)
STYLE
-V: VERTICAL
BODY SPEC
SEE TABLE 1
PLATING SPECIFICATIONS
-L: 10µ" SELECTIVE GOLD IN
CONTACT AREA, MATTE TIN ON TAIL
-F: 3µ" FLASH SELECTIVE GOLD IN
CONTACT AREA, MATTE TIN ON TAIL
-H: 30µ" HEAVY GOLD IN CONTACT AREA
3µ" MIN ON TAIL
-LM: 10µ" LIGHT SELECTIVE GOLD IN
CONTACT, MATTE TIN ON TAIL
-FM: 3µ" FLASH SELECTIVE GOLD IN
CONTACT, MATTE TIN TAIL
OPTIONS
-S: END SHROUDS (SEE FIG 2)
(N/A BELOW 15 POSITIONS)
-A: ALIGNMENT PINS
(SEE FIG 3 - SHEET 2)
(MINIMUM 13 POSITIONS)
-P: PICK & PLACE PAD
(SEE FIG 4, SHEET 2)
(AVAILABLE ON POSITIONS
-13 THRU -69) (SEE NOTE 3)
-TR: TAPE & REEL PACKAGING
(SEE FIG 6 - SHEET 2)
BKT-1XX-XX-XX-V-XX
.0120
SQ (TYP) REF
0.305
.065 1.65
"B" REF
T-1S16-03-XX-2
+.010 [.25]
.005 [.13]
((No OF POS -1) x .019685 [.50000])
.03937 1.0000
.200 5.08
REF
.100
REF
2.54
.220
±.010
5.59
±0.25
(SEE NOTE 2)
.019685 0.50000
(TYP)
+.010 [.25]
.005 [.13]
((No OF POS +1) x .019685 [.50000])
SEE NOTE 4
C
L
C
L
BKT-141-XX
POSITION 2
POSITION 1
"A"
.010
REF
0.25
90°
±3°
.100
REF
2.54
1
MAX TOE
(ANY DIRECTION)
+.005[.13]
-.000[.00]
(STYLES: -01, -03, -04, -05)
.004[.10]
2
MAX SWAY
(ANY DIRECTION)
.142 3.61
REF
"C"
x .019685[.50000])+.096[2.44]
((No OF POS +1)
.019685[.50000] +.016[.41]
((No OF POS+1) x
.175 4.45
REF
.250 6.35
REF
+ .016 [.41]
((No OF POS -1) x
.019685 [.50000])
BET-XX-L
BET-XX-R
"A"
+.005[.13]
-.000[.00]
(STYLES: -02)
(DIFFERENT AS SHOWN,
OTHERWISE SAME AS ABOVE)
CUT
CUT IN-PROCESS VIEW
(FIVE POSITIONS WILL BE LOST FOR EVERY CUT MADE)
FIG 1
FIG 2
DIFFERENT AS SHOWN,
OTHERWISE SAME AS FIG 1
SHEET OF
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS ANGLES
.XX:
.01 [.3] 3
.XXX:
.005 [.13]
.XXXX:
.0020 [.051]
1MM C.L. STAGGERED SURFACE MOUNT TERMINAL STRIP ASSEMBLY
BY:
BKT-1XX-XX-XX-V-XX
DWG. NO.
DESCRIPTION:
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS INFORMATION
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
DO NOT SCALE DRAWING
BRATCHER
03/28/95
2
1
SHEET SCALE: 4:1
F:\DWG\MISC\MKTG\BKT-1XX-XX-XX-V-XX-MKT.SLDDRW
NOTES:
1.
C
REPRESENTS A CRITICAL DIMENSION.
2. SHEAR TAILS TO DIMENSION AS SHOWN.
3. USE LMP-01 FOR LEAD STYLES -01 & -02. USE LMP-06 FOR STYLES -03,
-04 & -05. (SEE FIGURE 4).
4. CENTER TOP VOID CORING MAY OR MAY NOT BE PRESENT.
5. MIN RETENTION: 12 oz.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
MATERIAL:
INSULATOR: LCP, UL 94 VO, COLOR BLACK.
TERMINAL: PHOS BRONZE, SPRING TEMPER
REVISION BB
