OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

SKY65016-92LF

P1-P3P4-P5
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
June 8, 2006 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • 200355 Rev. B
DATA SHEET • SKY65016-92LF
4
Evaluation Board
Input Output
R
1
L
1
C
1
C
4
C
2
V
D
V
S
I
S
L
3
L
2
The SKY65016 evaluation board comprises the SKY65016
amplifier, the input and output of which are connected via
50 Ω microstrip transmission lines with DC blocking capacitors,
C
1
and C
2
, to the input and output SMA connectors, respectively.
The positive supply voltage, V
S
, is connected to pin 6, RF Output
of the amplifier via the decoupling network which consists of C
4
,
L
1
,L
2
and R
1
. The power supply current, I
S
, must be limited,
either via the current limit function of an external bench power
supply, or by replacing L
3
with resistor R
1
, the value of which is
given in the Current Limiting Resistor Values table. The evaluation
board is shipped with L
3
in place, which shifts an in-band series
resonance of the supply decoupling network out of band. For low
frequency applications, R
1
may be used to conveniently limit
supply current on the evaluation board.
The evaluation board also contains a probe fixture which
facilitates the direct measurement of the s parameters of the
SKY65016. The probe fixture comprises a very short coplanar
waveguide (CPW) transmission line to pin 3 and an identical line
to pin 6. All other pins of the amplifier are grounded. The CPW
transmission lines are compatible with ground-signal-ground
wafer probe tips, which can be connected to the RF ports of a
vector network analyzer (VNA) via coaxial cables. The very small
electrical length of these CPW transmission lines obviates the
need to de-embed their effects from the s parameters that are
measured. The supply constant current must be applied via the
bias tee, which is typically integrated into the VNA, which is cas-
cade with the output pin of the amplifier.
Component Description Value Size Suggested Part Number Comments
C
1
,C
2
,C
4
Capacitor 47 nF 0603
L
1
Inductor 33 nH 0603
L
2
Ferrite bead FBMH4525HM162N-T
R
1
Resistor See Current Limiting 0603
Resistor Values Table
U
1
Amplifier SKY65016
Evaluation Board Parts List
R
1
Minimum Power
V
S
, V Resistance,
ΩΩ
Dissipation Rating, mW
4 13 125
4.6 28 125
5 38 125
6 63 125
8 113 250
9 138 500
10 163 500
12 213 500
Current Limiting Resistor Values
DATA SHEET • SKY65016-92LF
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200355 Rev. B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • June 8, 2006 5
Copyright © 2002, 2003, 2004, 2005, Skyworks Solutions, Inc. All Rights Reserved.
Information in this document is provided in connection with Skyworks Solutions, Inc. (“Skyworks”) products. These materials are provided by Skyworks as a service to its customers and may be
used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials. Skyworks may make changes to its documentation, products,
specifications and product descriptions at any time, without notice. Skyworks makes no commitment to update the information and shall have no responsibility whatsoever for conflicts,
incompatibilities, or other difficulties arising from future changes to its documentation, products, specifications and product descriptions.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by or under this document. Except as may be provided in Skyworks Terms and Conditions of
Sale for such products, Skyworks assumes no liability whatsoever in association with its documentation, products, specifications and product descriptions.
THESE MATERIALS ARE PROVIDED “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED OR OTHERWISE, RELATING TO SALE AND/OR USE OF SKYWORKS PRODUCTS INCLUDING
WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL
PROPERTY RIGHT. SKYWORKS FURTHER DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS.
SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST
PROFITS THAT MAY RESULT FROM THE USE OF THESE MATERIALS WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications. Skyworks customers using or selling Skyworks products for use in such applications do so at their
own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale.
The following are trademarks of Skyworks Solutions, Inc.: Skyworks
®
, the Skyworks logo, and Breakthrough Simplicity
®
. Product names or services listed in this publication are for identification
purposes only, and may be trademarks of Skyworks or other third parties. Third-party brands and names are the property of their respective owners. Additional information, posted at
www.skyworksinc.com, is incorporated by reference.
P1-P3P4-P5

SKY65016-92LF

Mfr. #:
Buy SKY65016-92LF
Manufacturer:
Skyworks Solutions, Inc.
Description:
RF Amplifier LF-3.0GHz InGaP HBT Sm Sig Gain 20dB
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet