SFH601
www.vishay.com
Vishay Semiconductors
Rev. 1.6, 23-Jul-15
1
Document Number: 83663
For technical questions, contact: optocoupleranswers@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Optocoupler, Phototransistor Output, with Base Connection
DESCRIPTION
The SFH601 is an optocoupler with a gallium arsenide LED
emitter which is optically coupled with a silicon planar
phototransistor detector. The component is packaged in a
plastic plug-in case 20 AB DIN 41866.
The coupler transmits signals between two electrically
isolated circuits.
FEATURES
• Isolation test voltage (1.0 s), 5300 V
RMS
•V
CEsat
0.25 ( 0.4) V, I
F
= 10 mA, I
C
= 2.5 mA
• Built to conform to VDE requirements
• Highest quality premium device
• Long term stability
• Storage temperature, -55 ° to +150 °C
• Material categorization: for definitions of
compliance please see www.vishay.com/doc?99912
AGENCY APPROVALS
• UL1577, file no. E52744 system code H or J, double
protection
• DIN EN 60747-5-5 (VDE 0884-5) available with option 1
• CSA 93751
• BSI IEC 60950; IEC 60065
Note
• For additional information on the available options refer to option information.
1
2
3
6
5
4
B
C
E
A
C
NC
i179004-11
ORDERING INFORMATION
SFH601-#X0##
PART NUMBER CTR
BIN
PACKAGE OPTION
AGENCY CERTIFIED/PACKAGE CTR (%)
UL, BSI, CSA 40 to 80 63 to 125 100 to 200 160 to 320
DIP-6 SFH601-1 SFH601-2 SFH601-3 SFH601-4
DIP-6, 400 mil, option 6 SFH601-1X006 SFH601-2X006 SFH601-3X006 SFH601-4X006
SMD-6, option 7 SFH601-1X007 SFH601-2X007T SFH601-3X007(T) SFH601-4X007(T)
SMD-6, option 9 SFH601-1X009T SFH601-2X009 SFH601-3X009 SFH601-4X009(T)
VDE, cUL, UL, BSI 40 to 80 63 to 125 100 to 200 160 to 320
DIP-6, option 1 SFH601-1X001 SFH601-2X001 - SFH601-4X001
DIP-6, 400 mil, option 6 SFH601-1X016 - SFH601-3X016 SFH601-4X016
SMD-6, option 7 SFH601-1X017 SFH601-2X017(T) SFH601-3X017(T) -
SMD-6, option 9 - - SFH601-3X019(T) -
> 0.1 mm
10.16 mm
> 0.7 mm
7.62 mm
DIP
Option 7
Option 6
Option 9