OMO ElectronicOMO Electronic
Expand menu
Hello, Sign inMy Account
0 Cart

HMC489LP5E

P1-P3P4-P6P7-P7
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11
11 - 278
LINEAR & POWER AMPLIFIERS - SMT
Noise Figure vs. Temperature
Output IP3 vs. Temperature Power Compression @ 15 GHz
Gain, Power & Output IP3
vs. Supply Voltage @ 15 GHz
Reverse Isolation vs. Temperature
10
15
20
25
30
35
40
11 12 13 14 15 16 17
+25 C
+85 C
-40 C
IP3 (dBm)
FREQUENCY (GHz)
10
12
14
16
18
20
22
24
26
28
30
32
34
36
6.5 7 7.5
Gain
P1dB
Psat
IP3
Gain (dB), P1dB (dBm), Psat (dBm), IP3 (dBm)
Vdd Supply Voltage (Vdc)
10
15
20
25
30
35
40
700 800 900 1000 1100 1200 1300
Gain
P1dB
Psat
Gain (dB), P1dB (dBm), Psat (dBm), IP3 (dBm)
Idd Supply Current (mA)
IP3
0
3
6
9
12
15
11 12 13 14 15 16 17
+25 C
+85 C
-40 C
NOISE FIGURE (dB)
FREQUENCY (GHz)
-80
-60
-40
-20
0
11 12 13 14 15 16 17
+25 C
+85 C
-40 C
ISOLATION (dB)
FREQUENCY (GHz)
0
6
12
18
24
30
36
-8 -4 0 4 8 12 16 20 24
Pout
Gain
PAE
Pout (dBm), GAIN (dB), PAE (%)
INPUT POWER (dBm)
Gain, Power & OIP3
vs. Supply Current @ 15 GHz
HMC489LP5 / 489LP5E
SURFACE MOUNT PHEMT 1 WATT
POWER AMPLIFIER, 12 - 16 GHz
v01.0705
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
LINEAR & POWER AMPLIFIERS - SMT
11
11 - 279
Power Dissipation*
7
7.5
8
8.5
9
9.5
10
10.5
-10-8-6-4-2024681012141618202224
POWER DISSIPATION (W)
INPUT POWER (dBm)
14 GHz
Max Pdiss @ +85C
Vdd (Vdc) Idd (mA)
+6.5 1330
+7.0 1300
+7.5 1285
Typical Supply Current vs. Vdd
Note: Ampli er will operate over full voltage ranges shown
above. Vgg adjusted to achieve Idd= 1300 mA at +7.0V.
Absolute Maximum Ratings
Drain Bias Voltage (Vdd1, 2, 3, 4, 5) +8 Vdc
Gate Bias Voltage (Vgg) -2.0 to 0 Vdc
RF Input Power (RFIN)(Vdd = +7.0 Vdc) +28 dBm
Channel Temperature 150 °C
Continuous Pdiss (T= 85 °C)
(derate 154 mW/°C above 85 °C)
10 W
Thermal Resistance
(channel to ground paddle)
6.5 °C/W
Storage Temperature -65 to +150 °C
Operating Temperature -40 to +85 °C
Outline Drawing
* Refer to “Thermal Management for Surface Mount
Components” application note herein.
Part Number Package Body Material Lead Finish MSL Rating Package Marking
[3]
HMC489LP5 Low Stress Injection Molded Plastic Sn/Pb Solder
MSL1
[1]
H489
XXXX
HMC489LP5E RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn
MSL1
[2]
H489
XXXX
[1] Max peak re ow temperature of 235 °C
[2] Max peak re ow temperature of 260 °C
[3] 4-Digit lot number XXXX
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
HMC489LP5 / 489LP5E
SURFACE MOUNT PHEMT 1 WATT
POWER AMPLIFIER, 12 - 16 GHz
v01.0705
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
11
11 - 280
LINEAR & POWER AMPLIFIERS - SMT
Pin Number Function Description Interface Schematic
1 - 3, 5 - 8, 10 - 12,
14, 15, 17 - 20, 22 -
24, 26, 27, 29 - 31
N/C
No connection required. These pins may be connected to
RF/DC ground without affecting performance.
4 RFIN
This pin is AC coupled and
matched to 50 Ohms.
9 Vgg
Gate control for ampli er. Adjust to achieve Idd of 1300 mA.
Please follow “MMIC Ampli er Biasing Procedure”
Application Note. External bypass capacitors of 100 pF and
2.2
μF are required.
21 RFOUT
This pin is AC coupled and
matched to 50 Ohms.
32, 28, 25,
13, 16
Vdd1, Vdd2,
Vdd3, Vdd4,
Vdd5
Power Supply Voltage for the ampli er. External bypass
capacitors of 100 pF and 2.2
μF are required.
GND
Ground: Backside of package has exposed metal ground
slug that must be connected to ground through a short path.
Vias under the device are required
Pin Descriptions
Application Circuit
Component Value
C1 100 pF
C2 2.2 μF
HMC489LP5 / 489LP5E
SURFACE MOUNT PHEMT 1 WATT
POWER AMPLIFIER, 12 - 16 GHz
v01.0705
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registered trademarks are the property of their respective owners.
For price, delivery, and to place orders: Analog Devices, Inc.,
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106
Phone: 781-329-4700 • Order online at www.analog.com
Application Support: Phone: 1-800-ANALOG-D
P1-P3P4-P6P7-P7

HMC489LP5E

Mfr. #:
Buy HMC489LP5E
Manufacturer:
Analog Devices / Hittite
Description:
RF Amplifier 1 Watt pow amp SMT 12 - 16 GHz
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union

Products related to this Datasheet