https://www.phoenixcontact.com/us/products/1574564
11.11.2013Page2/4
Sensor/Actuator cable-SAC-8P-MS/15,0-285 SH SCO-1574564
Technical data
Material
Inflammability class according to UL 94 HB
Contact material CuZn
Contact surface material Ni/Au
Contact carrier material TPU GF
Material of grip body TPU, hardly inflammable, self-extinguishing
Material, knurls Zinc die-cast, nickel-plated
Sealing material NBR
Cable
Cable type PUR, gray, shielded
Cable type (abbreviation) 285
Cable abbreviation Li12YC11Y-HF
Conductor cross section 4x 2x 0.25 mm² (signal line)
1x 0.25 mm² (Drain wire)
AWG signal line 24
Conductor structure signal line 32x 0.10 mm
Wire colors white-brown, green-yellow, gray-pink, blue-red
Twisted pairs 2 cores to the pair
Overall twist 4 pairs for core
Shielding Tinned copper braided shield
Optical shield covering 85 %
External sheath, color Gray RAL 7001
External cable diameter D 7.6 mm ± 0.2 mm
Minimum bending radius, flexible installation 7.5 x D
Number of bending cycles 3000000
Bending radius 100 mm
Traversing path 1.2 m
Traversing rate 1.4 m/s
Acceleration 2 m/s²
Outer sheath, material PUR
Material conductor insulation PES
Conductor material Bare Cu litz wires
Insulation resistance ≥ 100 MΩ*km
Nominal voltage, cable 350 V
Test voltage, cable 1200 V
Special properties Low adhesion surface
wear-resistant and notch tough
Resistance to oil very good oil and chemical resistance
