Si3228x Data Short: ProSLIC
®
Single-Chip
Dual FXS Solution
The Si3228x Dual ProSLIC® devices, in a single package, implement two complete for-
eign exchange station (FXS) telephony interfaces. The Si3228x devices operate from a
3.3 V supply and have standard PCM/SPI or 3-wire ISI digital interfaces. A pair of built-in
dc-dc converter controllers can be used to automatically generate the optimal battery
voltage required for each line-state, optimizing efficiency and minimizing heat genera-
tion. The Si3228x devices are designed to operate with capacitive boost tracking battery
supply for lower power, cost, and footprint vs. other tracking or shared battery supplies
in the industry. Self-testing and metallic loop testing (MLT) is facilitated by the built-in
DSP, monitor ADC, and test load. The devices are available with wideband audio for
better than PSTN voice quality, DTMF detection, and Smart Ringing. Smart Ringing re-
duces the peak current with 2-channel ringing for lower-cost ac-dc adapters. The
Si3228x devices are available in a 7 x 7 mm 48-pin QFN or 8 x 8 mm 56-pin QFN pack-
age.
Applications:
• VoIP gateways and routers
• xDSL IADs
• Optical Network Terminals/Units (ONT/U)
• Analog Terminal Adapters (ATA)
• Cable eMTA
• Wireless Fixed Terminals (WFT)
• Wireless Local Loop (WLL)
• WiMAX CPE
• Private Branch Exchange (PBX)
• VoIP MDU gateways
RING
TIP
DSP
DTMF &
Tone Gen
Programmable
AC Impedance
and Hybrid
Ringing
Generator
ADC
DAC
CODEC
SLIC
Linefeed
Control
Linefeed
Monitor
Line Diagnostics
DSP
ADC
DAC
CODECCODEC
SLIC
Linefeed
Control
Linefeed
Monitor
PCLK / PSCLK
Si3228x
ADC
DAC
Linefeed
Channel A
3-wire ISI
or
PCM/SPI
Interface
PLL
Ringing
Generator
Line Diagnostics
DC-DC Controller
Caller ID
DTMF and
Tone Gen
Programmable
AC Impedance
and Hybrid
Host Interface
RING
TIP
ADC
DAC
CODEC
SLIC
Linefeed
Control
Linefeed
Monitor
ADC
DAC
CODECCODEC
SLIC
Linefeed
Control
Linefeed
Monitor
ADC
DAC
Linefeed
Channel B
Functional Block Diagram
KEY FEATURES
• Two complete FXS channels in a single 7x7
or 8x8 mm package
• Performs all BORSCHT functions
• Ideal for short- or medium-loop applications
• Ultra-low power consumption
• Patented low-power ringing
• Patent-pending Smart Ringing
• Reduces peak current with 2-channel
ringing
• Adaptive ringing
• Simplified configuration and diagnostics
• Supported by ProSLIC API
• Audio diagnostics with loopback
• Integrated test load
• Wideband voice support
• On-hook transmission
• Loop or ground start operation
• Smooth polarity reversal
• Programmable interrupts
• Software-programmable parameters:
• Ringing frequency, amplitude, cadence,
and waveshape
• Two-wire ac impedance
• Transhybrid balance
• DC current loop feed (10–45 mA)
• Loop closure and ring trip thresholds
• Ground key detect threshold
• Flexible integrated tracking DC-DC
controller supporting patent-pending low-
cost capacitive boost configuration
• DTMF Generation
• DTMF Detection (Si32281/3/5/7)
• 3-wire Integrated Serial Interface (ISI) or
PCM interface
• A-Law/µ-Law companding, linear PCM
• Pulse metering
• 3.3 V operation
• Pb-free/RoHS-compliant packaging
silabs.com
| Smart. Connected. Energy-friendly. Preliminary Rev. 0.5
This information applies to a product under development. Its characteristics and specifications are subject to change without notice.