http://www.tracopower.com Page 2 of 3
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
Input Specifications
Input current no load /full load 3.3 Vin models: 35 mA / 370 mA typ.
5 Vin models: 30 mA / 270 mA typ.
12 Vin models: 13 mA / 110 mA typ.
24 Vin models: 7 mA / 55 mA typ.
Surge voltage (1 s max.) 3.3 Vin models: 6 V max.
5 Vin models: 9 V max.
12 Vin models: 18 V max.
24 Vin models: 30 V max.
Reverse polarity input current 0.3 A max.
Reflected input ripple current can be reduced by ext. 1 – 3.3 µF polyester film
capacitor
Input filter Internal capacitors
Output Specifications
Voltage set accuracy ±1 % typ. / ±3 % max.
Regulation – Input variation (1 % change of input voltage) 1.2 % typ. / 1.5 % max.
– Load variation (20 – 100 %) 4 to 14 % max. (depending on model)
Ripple and noise (20 MHz Bandwidth) 150 mVp-p max.
Temperature coefficient ±0.01 %/K typ. / ±0.02 %/K max.
Short circuit protection limited 0.5 s max.
Capacitive load 33 µF max.
General Specifications
Temperature ranges – Operating –40°C to +85°C
– Case temperature +90°C max.
– Storage –50°C to +125°C
Derating 5 VDC output models: 3.3 %/K above 70°C
other output models: 4.0 %/K above 75°C
Humidity (non condensing) 95 % rel H max.
Reliability, calculated MTTF (MIL-HDBK-217F, @+25°C ground benign) >2’000’000 h
Isolation voltage (60 sec.) Input/Output 1‘000 VDC
Isolation capacity Input/Output 60 pF typ.
Isolation resistance Input/Output >1‘000 Mohm
Switching frequency 50 to 110 kHz (Frequency modulation)
DC/DC Converters
TME Series 1 Watt