DESCO WEST: 3651 WALNUT AVE., CHINO, CA 91710 WEB SITE: Desco.com
PHONE (909) 627-8178 FAX (909) 627-7449
DESCO EAST: ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE (781) 821-8370 FAX (781) 575-0172
DRAWING
NUMBER
13405
DATE:
October
2011
© 2011 DESCO INDUSTRIES INC.
Employee Owned
STATSHIELD
®
BAG, SHIELDING, METAL-IN CONSTRUCTION, .0030" (.0762mm)
Side Weld Seals 3/8 in. (±0.10)
Mixed Unsortable Plastic Scrap
Mixed unsortable plastic scrap shall contain assorted plastics
of multiple grades that are co-extruded, bonded or laminated
together which are unsortable into individual grades
Desco’s bags are recyclable
7
STATSHIELD
®
METAL-IN SERIES
Specifications:
Electrical Properties Typical Values Test Procedures/Method
Surface Resistance:
Outer Surface <10E11 ohms ANSI/ESD STM11.11
Inner Surface <10E11 ohms ANSI/ESD STM11.11
Static Shielding <25 nJ ANSI/ESD STM11.31
Charge Generation Teflon: 0.09 nC/sq. in. Modified Incline Plane
Quartz: 0.01 nC/sq. in. Modified Incline Plane
Capacitance Probe (to dissipate 1 KV) <30 volts ANSI/EIA-541/Appendix E, 1kV Discharge
Physical Properties
Bag Thickness:
Thickness Nominal .0030" (.0762mm) ±10% MIL-STD-3010, 1003
Width (Inside Dimensions) Nominal -0" / + .125"
Length (Inside Dimensions) Nominal ± .125"
Light Transmission >40% (Tobias) ASTM D-1003
Heat Seal >10 lbs/in 375°F, 1/2 sec 60 psi
Tensile 9000 PSI ASTM D882
Puncture Resistance >10 lbs MIL-STD-3010, 2065
MVTR <0.40 FTMS 101C/2065
OTR <6.1 ASTM D-1434
Outgassing Pass ASTM E595
Non-corrosive Pass MIL-STD-3010, M3005
Chemical Properties
Corrosion: No effect on aluminum, copper, silver, Sn-Pb coated foil,
stainless steel, low carbon steel
Polycarbonate compatible: Contains no Amines, Amides, or N-Octanoic Acid.
Bag is free of amines, N-octanoic acid, silicones and heavy metals.
Low Charging Static
Dissipative Proprietary
Outer Polyester Layer
Aluminum Shielding Layer
Low Charging Static
Dissipative Proprietary
Inner Polyethylene Layer
*Film made in USA or Malaysia
Specications and procedures subject to change without notice.
Date & Lot Code
Printed for QC
Traceablility
Statshield
®
bags are packaged 100 per package in an oversized shielding bag.
Shelf life of bags is minimum one year in normal indoor storage conditions.
*Made in the
United States of America
The bag’s material meets the required limits of ANSI/ESD S541 per ANSI/ESD S20.20.
Statshield
®
and Statfree
®
are Registered Trademarks of Desco Industries Inc.
RoHS and REACH Compliance Statement
None of the RoHS restricted materials or REACH substances of very high concern are intentionally
added in manufacturing this product. Ref: Directive 2002/95/EC Article 4.1. and Regulation (EC) No.
1907/2006. See Desco Industries Inc. Limited Warranty at Desco.com.
ANSI/ESD S541 Section 6.2 Outside an EPA
“Transportation of sensitive products outside of an EPA shall require packaging that provides:
1. Low charge generation
2. Dissipative or conductive materials for intimate contact
3. A structure that provides electrostatic discharge shielding.”
