NCP600
http://onsemi.com
2
Figure 2. Pin Connections − TSOP5
Figure 3. Pin Connections − DFN6
(Top View)
1
2
3
5
4
V
in
GND
ENABLE
V
out
ADJ/NC*
PIN CONNECTIONS
1
3
ENABLE
V
out
2
GND
NC
4
V
in
6
(Top View)
5
GNDGND
* ADJ − Adjustable Version
* NC − Fixed Voltage Version
PIN FUNCTION DESCRIPTION
Pin No.
Pin Name Description
DFN6 TSOP−5
3 4 ADJ/NC Output Voltage Adjust Input (Adjustable Version), No Connection (Fixed Voltage Versions)
(Note 1)
2, 5, EPAD 2 GND Power Supply Ground; Device Substrate
4 3 ENABLE The Enable Input places the device into low−power standby when pulled to logic low
(< 0.4 V). Connect to V
in
if the function is not used.
6 1 V
in
Positive Power Supply Input
1 5 V
out
Regulated Output Voltage
1. True no connect. Printed circuit board traces are allowable.
ABSOLUTE MAXIMUM RATINGS
Rating Symbol Value Unit
Input Voltage Range (Note 2) V
in
−0.3 to 6.5 V
Output, Enable, Adjustable Voltage Range V
out
,
ENABLE, ADJ −0.3 to 6.5 (or V
in
+ 0.3)
Whichever is Lower
V
Maximum Junction Temperature T
J(max)
150 °C
Storage Temperature Range T
STG
−65 to 150 °C
ESD Capability, Human Body Model (Note 3) ESD
HBM
3500 V
ESD Capability, Machine Model (Note 3) ESD
MM
200 V
Moisture Sensitivity Level MSL MSL1/260 −
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
2. Refer to ELECTRICAL CHARACTERISTICS and APPLICATION INFORMATION for Safe Operating Area.
3. This device series incorporates ESD protection and is tested by the following methods:
ESD Human Body Model tested per AEC−Q100−002 (EIA/JESD22−A114)
ESD Machine Model tested per AEC−Q100−003 (EIA/JESD22−A115)
Latchup Current Maximum Rating: v150 mA per JEDEC standard: JESD78.
THERMAL CHARACTERISTICS
Rating Symbol Value Unit
Thermal Characteristics, DFN6, 2x2.2 mm (Note 4)
Thermal Resistance, Junction−to−Air (Note 5)
R
q
JA
122
°C/W
Thermal Characteristics, TSOP−5 (Note 4)
Thermal Resistance, Junction−to−Air (Note 5)
R
q
JA
215
°C/W
4. Refer to ELECTRICAL CHARACTERISTICS and APPLICATION INFORMATION for Safe Operating Area.
5. Values based on copper area of 645 mm
2
, 1 oz copper thickness.
OPERATING RANGES (Note 6)
Rating
Symbol Min Max Unit
Operating Input Voltage (Note 7) V
in
1.75 V 6 V
Adjustable Output Voltage (Adjustable Version Only) V
out
1.25 5.0 V
Output Current I
out
0 150 mA
Ambient Temperature T
A
−40 125 °C
6. Refer to ELECTRICAL CHARACTERISTICS and APPLICATION INFORMATION for Safe Operating Area.
7. Minimum V
in
= 1.75 V or (V
out
+ V
DO
), whichever is higher.