DATASHEET
LAMP
EALP05RDEWA3
Copyright © 2010, Everlight Americas Inc. All Rights Reserved. Release Date : Mar.18, 2013.. Issue No: 1
www.everlightamericas.com
6. Heat Management
Heat management of LEDs must be taken into consideration during the design stage of LED application. The
current should be de-rated appropriately by referring to the de-rating curve found in each product
specification.
The temperature surrounding the LED in the application should be controlled. Please refer to the data sheet
de-rating curve.
7. ESD (Electrostatic Discharge)
Electrostatic discharge (ESD) or surge current (EOS) can damage LEDs.
An ESD wrist strap, ESD shoe strap or antistatic gloves must be worn whenever handling LEDs.
All devices, equipment and machinery must be properly grounded.
Use ion blower to neutralize the static charge which might have built up on surface of the LEDs plastic lens as
a result of friction between LEDs during storage and handing.
8. Other
Above specification may be changed without notice. EVERLIGHT AMERICAS will reserve authority on
material change for above specification.
When using this product, please observe the absolute maximum ratings and the instructions for using outlined
in these specification sheets. EVERLIGHT AMERICAS assumes no responsibility for any damage resulting
from use of the product which does not comply
with the absolute maximum ratings and the instructions included in these specification sheets.
These specification sheets include materials protected under copyright of EVERLIGHT AMERICAS Inc..
Please don’t reproduce or cause anyone to reproduce them without EVERLIGHT AMERICAS’s consent.
