146
021717
THH 230ºC Hermetic Series
SMD 230ºC High Temperature
Tantalum Capacitor in Hermetic Package
QUALIFICATION TABLE
TEST
THH 230°C hermetic series (Temperature range -55ºC to +230ºC)
Condition Characteristics
Visual examination no visible damage
DCL 1.25 x initial limit
Endurance ΔC/C within ±20% of initial value
DF 1.5 x initial limit
ESR 3 x initial limit
Visual examination no visible damage
DCL 1.25 x initial limit
Endurance ΔC/C within ±20% of initial value
DF 1.5 x initial limit
ESR 3 x initial limit
Visual examination no visible damage
DCL initial limit
Storage Life 230ºC, 0V, 1000h + 48/-0 hours ΔC/C within ±5% of initial value
DF initial limit
ESR 1.25 x initial limit
Visual examination no visible damage
DCL initial limit
ΔC/C within ±10% of initial value
DF initial limit
ESR 1.25 x initial limit
+20ºC -55ºC +20ºC +85ºC +125ºC +175ºC +200ºC +230ºC +20ºC
DCL
IL* n/a IL* 10 x IL* 12.5 x IL* n/a n/a n/a IL*
ΔC/C
n/a +0/-20% ±5% +20/-0% +30/-0% +30/-0% +30/-0% +30/-0% ±5%
DF
IL* 1.5 x IL* IL* 1.5 x IL* 2 x IL* 2 x IL* 2 x IL* 2 x IL* IL*
ESR
1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL* 1.25 x IL*
Visual examination no visible damage
DCL initial limit
ΔC/C within ±20% of initial value
DF initial limit
ESR 1.25 x initial limit
Visual examination no visible damage
DCL initial limit
ΔC/C within ±10% of initial value
DF initial limit
ESR 1.25 x initial limit
Visual examination no visible damage
DCL initial limit
ΔC/C within ±5% of initial value
DF initial limit
ESR 1.25 x initial limit
Determine after application of 230°C temperature,
category voltage for 2000+48/-0 hours and then
leaving min. 2 hours at room temperature. Power
supply impedance to be <3Ω.
Determine after application of 0.5U
R
for
10000+48/-0 hours at 200°C temperature and
then leaving min. 2 hours at room temperature.
Power supply impedance to be <3Ω.
Determine after application of 230°C temperature
and vibration frequency:
10 ~ 2000 ~ 10Hz in 20 min
Full amplitude: 3 mm/20g
Vibration directions time
X, Y Z directions: 4 hours
each direction: total 12 hrs.
Determine after leaving for 1000 hours at 85±2ºC,
85% relative humidity and rated voltage and then
recovery min. 2 hours at room temperature.
Test temperature: 85ºC+3/0ºC
Surge voltage: 1.3 x rated voltage
Series protection resistance: 33Ω
Discharge resistance: 33Ω
Number of cycles: 1000x
Cycle duration: 5 min; 30 sec charge,
5 min 30 sec discharge
Step Temperature°C Duration (min)
1 +20 15
2 -55 15
3 +20 15
4 +85 15
5 +125 15
6 +175 15
7 +200 15
8 +230 15
9 +20 15
*Initial Limit
MIL-STD-202, Method 213, Condition I, 100 G peak
MIL-STD-202, Method 204, Condition D,
10 Hz to 2,000 Hz, 20 G peak
Mechanical
Shock/Vibration
Vibration
230ºC
Surge
Voltage
Temperature
Stability
Biased
Humidity
