D/CRCW-P
www.vishay.com
Vishay
Revision: 21-Jan-14
1
Document Number: 20009
For technical questions, contact: thickfilmchip@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Lead (Pb)-Bearing Thick Film, Rectangular,
Semi-Precision Chip Resistors
FEATURES
• Low temperature coefficient (50 ppm/K) and tight
tolerances (± 0.25 %)
• Lead (Pb)-bearing termination plating on Ni barrier layer
• Metal glaze on high quality ceramic
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Notes
• These resistors do not feature a limited lifetime when operated within the limits of rated dissipation, permissible operating voltage and
permissible film temperature. However, the resistance typically increase due to the resistor’s film temperature over operating time generally
known as drift. The drift may exceed the stability requirements of an individual application circuit and thereby limits the functional time.
• Marking and packaging: See datasheet “Surface Mount Resistor Marking” (www.vishay.com/doc?20020
).
• Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material.
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
CASE
SIZE
INCH
CASE
SIZE
METRIC
POWER
RATING
P
70
W
LIMITING
ELEMENT
VOLTAGE
U
max.
AC
RMS
/DC
V
TEMPERATURE
COEFFICIENT
ppm/K
TOLERANCE
%
RESISTANCE
RANGE
SERIES
D10/CRCW0402-P 0402 1005 0.063 50
± 100 ± 0.5 10 to 1M
E24; E96
± 50 ± 0.25, ± 0.5, ± 1 100 to 1M
D11/CRCW0603-P 0603 1608 0.1 75
± 100 ± 0.5 10 to 10M
E24; E96
± 50
± 0.25 100 to 1M
± 0.5, ± 1 100 to 10M
D12/CRCW0805-P 0805 2012 0.125 150
± 100 ± 0.5 10 to 10M
E24; E96
± 50
± 0.25 100 to 1M
± 0.5, ± 1 100 to 10M
D25/CRCW1206-P 1206 3216 0.25 200
± 100 ± 0.5 10 to 10M
E24; E96
± 50
± 0.25
100 to 1M
± 0.5, ± 1 100 to 10M
CRCW1210-P 1210 3225 0.5 200
± 100 ± 0.5
100 to 1M
E24; E96
± 50 ± 0.5, ± 1 100 to 1M
CRCW1218-P 1218 3246 1.0 200
± 100 ± 0.5
100 to 2.2M
E24; E96
± 50 ± 0.5, ± 1
100 to 2.2M
CRCW2010-P 2010 5025 0.75 400
± 100 ± 0.5 10 to 10M
E24; E96
± 50 ± 0.5, ± 1 100 to 10M
CRCW2512-P 2512 6332 1.0 500
± 100 ± 0.5 10 to 10M
E24; E96
± 50 ± 0.5, ± 1 100 to 10M