AT88SC3216C
19
5014KS–SMEM–08/09
15.2. Ordering Code: PU
8P3 – PDIP
COMMON DIMENSIONS
(Unit of Measure = inches)
SYMBOL
MIN
NOM
MAX
NOTE
D
D1
E
E1
e
L
b2
b
A2 A
1
N
eA
c
b3
4 PLCS
Top View
Side View
End View
DRAWING NO.
2325 Orchard Parkway
San Jose, CA 95131
R
REV.
8P3 B
01/09/02
TITLE
8P3, 8-lead, 0.300" Wide Body, Plastic Dual
In-line Package (PDIP)
A
A2
b
b2
b3
c
D
D1
E
E1
e
eA
L
0.115
0.014
0.045
0.030
0.008
0.355
0.005
0.300
0.240
0.115
0.130
0.018
0.060
0.039
0.010
0.365
0.310
0.250
0.130
0.210
0.195
0.022
0.070
0.045
0.014
0.400
0.325
0.280
0.150
2
5
6
6
3
3
4
3
4
2
0.100 BSC
0.300 BSC
Notes: 1. This drawing is for general information only; refer to JEDEC Drawing MS-001, Variation BA, for additional
information.
2. Dimensions A and L are measured with the package seated in JEDEC seating plane Gauge GS-3.
3. D, D1 and E1 dimensions do not include mold Flash or protrusions. Mold Flash or protrusions shall not
exceed 0.010 inch.
4. E and eA measured with the leads constrained to be perpendicular to datum.
5. Pointed or rounded lead tips are preferred to ease insertion.
6. b2 and b3 maximum dimensions do not include Dambar protrusions. Dambar protrusions shall not exceed
0.010 (0.25 mm).
20 AT88SC3216C
5014KS–SMEM–08/09
Appendix A. Revision History
Doc. Rev. Date Comments
5014KS 08/2009 Update TWI module informaiton
5014JS 02/2009 Features Section – add ‘Green compliant (exceeds RoHS) to end of ‘Standard 8-lead
Plastic Packages’ bullet added Note to DC Characteristics table and applied to V
CC
and
all 3 instances of Vih symbols in table.
Ordering Information page: Add ‘Green compliant (exceeds RoHS) to middle row of
Temperature Range Replace ‘Lead-free/Halogen-free. Keep industrial
Updated to 2009 Copyright.
5014IS 01/2009 Removed P module offering.
5014HS 11/2008 Updated timing diagrams.
5014GS 04/2007 Final release version.
5014GS 01/26/2007 Replaced User Zone, Configuration Memory, and Write Lock
Example tables with new information.
5014GS 01/2007 Implemented revision history.
Removed Industrial package offerings.
Removed 8Y4 package offering.
5014KS–SMEM–08/09
Headquarters
International
Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131
USA
Tel: 1(408) 441-0311
Fax: 1(408) 487-2600
Atmel Asia
Unit 1-5 & 16, 19/F
BEA Tower, Millennium City 5
418 Kwun Tong Road
Kwun Tong, Kowloon
Hong Kong
Tel: (852) 2245-6100
Fax: (852) 2722-1369
Atmel Europe
Le Krebs
8, Rue Jean-Pierre Timbaud
BP 309
78054 Saint-Quentin-en-
Yvelines Cedex
France
Tel: (33) 1-30-60-70-00
Fax: (33) 1-30-60-71-11
Atmel Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: (81) 3-3523-3551
Fax: (81) 3-3523-7581
Product Contact
Web Site
www.atmel.com
Technical Support
securemem@atmel.com
Sales Contact
www.atmel.com/contacts
Literature Requests
www.atmel.com/literature
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any
intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND
CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED
OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDEN-TAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED
OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this
document and reserves the right to make changes to specifications and product descriptions at any time without notice. Atmel does not make any commitment to
update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive
applications. Atmel’s products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life.
© 2009 Atmel Corporation. All rights reserved. Atmel
®
, Atmel logo and combinations thereof, CryptoMemory
®
and others, are registered trademarks or
trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.

AT88SC3216C-SU

Mfr. #:
Manufacturer:
Microchip Technology / Atmel
Description:
EEPROM CRYPTOMEMORY 32kB 16 ZONE - 8 IND TEMP
Lifecycle:
New from this manufacturer.
Delivery:
DHL FedEx Ups TNT EMS
Payment:
T/T Paypal Visa MoneyGram Western Union