Type 4X Polyester Wallmount Enclosure
PW Series
Hinge Door with Quarter Turn
Note: This product line has been discontinued as a stocked series. Information is for reference only. For
alternative solution assistance, please contact Hammond Customer Service - sales@hammfg.com or USA
(716) 630-7030, Canada and International (519) 822-2960.
Application
Designed to house Industrial control, instrumentation, pneumatic, valve
and pump control systems.
Excellent protection against corrosion and ultra violet rays making this a
suitable enclosure for outdoor installations.
High resistance to impact and temperature for industrial installations when
subjected to frequent water exposure.
Standards
UL/cUL 508 Type 1, 2, 3, 4, 4X, 12 & 13
Complies with
NEMA 1, 2, 3, 3R, 3S, 4, 4X, 12, 13
IEC 60529, IP 66
Construction
Fiberglass reinforced polyester is self extinguishing and has operating
temperatures of -50°C to 150°C (-58°F to 302°F).
One piece monoblock body.
Entire enclosure can be reversed to allow door to swing right or left.
Built-in canopy at top and bottom protects the door and gasket and allows
reversibility.
Self-ventilating openings are located at the rear of the enclosure to permit
installation of breather or pressure compensation plugs.
Internal stainless steel hinges, built into the door with captive pins.
Door opening of over 180°.
Quarter turn fasteners are located outside the gasketed area.
Grid pattern is provided on inside door area for ease of locating equipment.
Tamperproof "double bar" quarter turn fasteners.
Dielectric rigidity > 5kV insulating resistance > 5 MW.
For corrosion resistance information, please refer to table in the Technical
Information section.
Finish
Fiberglass polyester material is finished in RAL 7032 beige.
Optional inner panels are available in white powder coated finished steel or
unfinished aluminum.
Accessories
Quality Products. Service Excellence.
