MP2249 – 6V, 3A, 1MHZ, SYNCHRONOUS STEP-DOWN CONVERTER
MP2249 Rev.1.0 www.MonolithicPower.com 2
1/6/2016 MPS Proprietary Information. Patent Protected. Unauthorized Photocopy and Duplication Prohibited.
© 2016 MPS. All Rights Reserved.
ORDERING INFORMATION
Part Number Package Top Marking Free Air Temperature (T
A
)
MP2249DN SOIC8E MP2249
MP2249DQT * TQFN10 (3mm x 3mm) AAVY
-40°C to +85°C
* For Tape and Reel, add suffix -Z (e.g. MP2249DQT–Z).
For RoHS Compliant Packaging, add suffix - LF (e.g. MP2249DQT–LF–Z);
PACKAGE REFERENCE
TQFN10 (3mm x 3mm) SOIC8E
ABSOLUTE MAXIMUM RATINGS
(1)
PVIN to GND ...............................-0.3V to +6.5V
SW to GND ............................-0.3V to V
IN
+0.3V
FB, EN & PG to GND...................-0.3V to +6.5V
Junction Temperature.............................+150°C
Continuous Power Dissipation (T
A
= +25°C)
(2)
SOIC8E...................................................... 2.5W
TQFN10 (3mmx3mm) ................................ 2.5W
Lead Temperature ..................................+260°C
Storage Temperature .............. -65°C to +150°C
Recommended Operating Conditions
(3)
Supply Voltage V
IN
.............................2.5V to 6V
Output Voltage V
OUT
...........................0.6V to 6V
Operating Junct. Temp. ........... -40°C to +125°C
Thermal Resistance
(4)
θ
JA
θ
JC
SOIC8E .................................. 50 ...... 10... °C/W
TQFN10 (3mmx3mm)............. 50...... 12... °C/W
Notes:
1) Exceeding these ratings may damage the device.
2) The maximum allowable power dissipation is a function of the
maximum junction temperature. T
J
(MAX) the junction-to-
ambient thermal resistance
JA
and the ambient temperature
T
A
. The maximum allowable power dissipation at any ambient
temperature is calculated using: P
D
(MAX)=(T
J
(MAX)-T
A
)/
JA
.
Exceeding the maximum allowable power dissipation will
cause excessive die temperature, and the regulator will go
into thermal shutdown. Internal thermal shutdown circuitry
protects the device from permanent damage.
3) The device is not guaranteed to function outside of its
operating conditions.
4) Measured on JESD51-7, 4-layer PCB.